• Model:CAB-315

Acoustic Box Fans (Inline) - CAB-315 RE

£ 692.54 (excl. VAT)

£ 831.05 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 2109 m3/h
Max Power: 360 Watts
Max Current: 1.5 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 33 Kgs
Part Num: 5148515100

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-315 RE Data Sheet

1 x Purlin Box 300/315 for RAW Cowls1 x JPA-560 Accessory Adapter Plate1 x Purlin Box 350 for RAW Cowls1 x Spigot plate - 80mm1 x Male Ducting Connector - 80mm1 x Etaline 315mm - E2 03 (Low Power Version)1 x CBMT/Q 250-30 1 HEATER KIT1 x SILENTUB 100/120 Mounting Feet1 x Ducting Reducers Short - 315mm-250mm1 x Soler & Palau - HCFT/4-1000/L-X - IP551 x Soler & Palau - HCFT/4-1000/H-X - IP551 x HV Wall Mounted Belt Drive Fan 1000mm 220V to 240V / 50Hz 0.75kW - Single Phase1 x JAA-560 Acoustic Upstand1 x Inclined Kurb support for CTVB/T Fans - BI-51 x Purlin Box 800 for RAW Cowls1 x Purlin Box 500/560 for RAW Cowls1 x Inclined Curb support BI-3 for TH-5001 x JBS-1250 Flat Roof Upstand for HCTT/4-1000/B2 x Purlin Box 1000 for RAW Cowls1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-1000-B 5.5kw1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-900-B 5.5kw1 x Female Ducting Connector - 80mm1 x Spiral end cap - 80mm1 x Ducting 45 Degree Bend - 80mm1 x TD1300 Mixvent - 250mm1 x Ducting 90 Degree Bend - 80mm1 x Spiral Ducting 1 meter - 80mm1 x Female Ducting Connector - 250mm1 x TUNE-R-160-3-M2 - Control Damper1 x Ducting Reducers Short - 355mm-315mm1 x Ducting Y Piece - 100mm1 x Soler & Palau - HCBT/4-1000/H-X - IP551 x Soler & Palau - HCBT/6-1000/H - IP551 x HV Wall Mounted Belt Drive Fan 1000mm 400V / 50Hz 0.75kW - Three Phase1 x Soler & Palau - HCBT/4-1000/L - IP551 x Rosenberg DQ 1000-8 plate axial fan1 x SG AW 1000 Guard 6-Pole1 x Ducting 90 Degree Bend - 125mm1 x 100mm Round Condensation Trap1 x 125mm Insulated 90 Degree Bend1 x Ducting T Piece Equal - 200mm1 x U42K Screws for duct1 x Ducting 90 Degree Bend - 200mm1 x Spiral Ducting 3 Meters - 200mm1 x Ducting 45 Degree Bend - 200mm1 x Duct Quick Suspension Rings with Clasp - 200mm1 x Ducting 30 Degree Bend - 200mm1 x Flanged Spigot - 200mm1 x Metal Inline Fan - VENT-200NK
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...