• Model:CAB-315

Acoustic Box Fans (Inline) - CAB-315 RE

£ 727.17 (excl. VAT)

£ 872.60 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 2109 m3/h
Max Power: 360 Watts
Max Current: 1.5 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 33 Kgs
Part Num: 5148515100

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-315 RE Data Sheet

1 x D2E-146-AP47-751 x Small Centrifugal Fans CBM/2-133/190 185w2 x EBM-Papst D3G133-BF05-14 Double inlet2 x D2E146-AP47-331 x G2E160−AL19−56 FLUE FAN1 x Small Centrifugal Fan - CBM/4-180/184-150 W1 x D2E146-AP47-C11 x EBM-Papst D3G160-BP03-15 Double inlet1 x D2E146-HT67-022 x Transformer 5 Speed Controller - ATC1-10TK1 x EBM-Papst D2E097-BK76-98 Double inlet1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven2 x Speed Controller - REB52 x Speed Controller - REB31 x Speed Controller - REB101 x Speed Controller - REB1-N1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Easy-fix termination kit - High Rise Ventilator - EFT2 x Transformer Speed Control - RTRE- 7.0Amp2 x Helios TSW 1.5 Amp Transformer speed controller1 x Speed Controller - REB12 x CBM 9-9 550w 4P VR (Open Motor)1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3552 x Transformer Speed Control - RTRE- 1.5Amp1 x Elta Wall Cowl SWC56/632 x DDMP 09/09 Mounting Flange1 x GRA-100 External Grill by S&P1 x Elta Louvre Shutter - 400mm1 x Elta Wall Cowl SWC35/401 x Elta Wall Cowl SWC25/311 x DEF-CBM-RE-7 - Protection Guard1 x Elta Wall Cowl SWC45/502 x CBT-100N Centrifugal1 x Jet Cowl - 315mm1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7102 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x CBP-18/18-RC Belt Driven Centrifugal Fans2 x ACO8AC/EC AutoChangeover panel1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x Binks Bullows - Spray Booth Filter1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x CBB-60N Centrifugal1 x CBT-80N Centrifugal1 x RUCK MTP 20, 10K, Speed control1 x CBM 7/7 147w 4P RE-VR1 x DPD 12PM Delivery Surcharge1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x KBA- Inlet Mounting 1801 x Potentiometer EGH 01 - for DDMP Fans1 x CBP-9/7-RC1 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x Chaysol DA 9/9 3 speed1 x CBP-7/7-RC1 x DDMP 09/07 Mounting Flange1 x Elta SLC560/4C-3AC - IP551 x DDMP 10-10 FLANGE1 x DDMP 12-12 FLANGE1 x CBP-9/9 LOW PRESSURE CENTRIFUGAL FAN1 x DA 9/7 N2T1 x RDH Flange - 02001 x Pallet Delivery Surcharge1 x Small Centrifugal Fan - CBM/4-160/150-125 W1 x Helios DDF-200 Roof Cowl1 x Acoustic Box Fans (Inline) - CAB-1002 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Run On Timer - 5s - 4hrs - RT5A1 x CBM 7/9 6p 72W RE-VR1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x Chaysol da 9-7 - 3 Speed1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Remote controller FLEX - for VEKO INT1 x Transformer 5 Speed Controller - ATC1-2TK1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Helios TSW 7.5 Amp Transformer speed controller1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Vent Axia ACM 150 inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-8TK1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Transformer 5 Speed Controller - ATC1-4TK1 x Systemair Save Connect 2.0 Internet Module1 x Helios TSW 0.3Amp Compact Transformer speed controller1 x Helios TSW 3 Amp Transformer speed controller1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Three Phase 3 step - 10amp Transformer controller for use with the HV Wall Mounted fans.1 x RDS 11 Helios Transformer Controller With Motor Protection2 x Helios TSW MCB Amp Transformer speed controller1 x CS2 Current Switch1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Vent Axia ACM 125 inline mixed flow duct fan1 x MWS 3 – Transformer Controller With Motor Protection1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Helios HQW-200/2 - IP551 x Elta 6 Amp Electronic single phase speed controller with TK1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x MWS 1.5 – Transformer Controller With Motor Protection1 x WS - Reversing Switch from Helios Fans1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box1 x Helios HQW-200/4 - IP551 x Transformer (silent) speed controller - RE 3.0 Amp1 x Elta 10 Amp Electronic single phase speed controller.1 x CBS-60 Outlet Flange for CSB/CBT-601 x ERR 31/1 Centrifugal inline fan1 x Multiflow SMB550/4-1AC1 x MTV-1/010 Controller 0 to 10V+1 x Electronic extractor fan speed controller - FSC 1.51 x REB-CVF 0-10v Controller1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Elta Variable Speed Drive IP66 - 0.75KW1 x FFR 355 Filter Cassette1 x REE-2 Electronic Speed Controller1 x Silent 100 Window Kit - windowS1 x PIR Sensor - PIR21 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x PIR Sensor - PIR41 x DDMP 09-09 3F 2130W M6A4 DG01 x Vent Axia Silent 100T (TIMER)1 x TD Mixvent 800/200 EEXEIIT31 x UB47- Universal Insulated Terminal1 x Helios HQW-250/4 - IP551 x Transformer Speed Control - RTRE- 5.0Amp1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x MTS10- extractor fan 3 step switch1 x DDMP 12-12 3F 1810W M6A4 DG01 x Speed Controller - REB2.5-N1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x Elta Variable Speed Drive IP66 - 4.0KW1 x MEV Spider Wireless boost Switch - MEV-SWH-W1 x KKS 100 silencer-section - For use with the MUB 100 size Fans.1 x CBA-60 Inlet Flange for CBT-601 x QPTW 250C Acoustic Twin Fan with Controller1 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Elta - Room Sensor - Temp/Humid/C021 x Elta 6 Amp Electronic single phase speed controller.1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x DDMP 10-08 3F 2210W M6A4 DG01 x GENIOX 11 Internal Mounted Unit1 x AIRVENT speed control - AIR4019611 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x Duct Termination with Mesh - 355mm1 x Elta Variable Speed Drive IP66 - 5.5KW1 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x AXC TP - 100mm Plastic Centrifugal Inline Fan1 x RS 80-50 L3 sileo. Centrifugal Rectangular Duct Fan1 x Contactor Interface Station - CI91 x ELM 20 EX Flexible Cuff for ERM 221 x CO2 Room Sensor - CO2-R1 x LFBR 315 G4 - Helios Inline Filter Box - 315mm1 x CBM 12-12 1100w 6P Three Phase1 x Duct Termination with Mesh - 710mm1 x Helios RR-250-C Centrifugal inline fan1 x CSB-60 Centrifugal fan1 x LFBR 160 G4 - Helios Inline Filter Box - 160mm1 x Vertical Cowl and Fan (Single Phase) - RAV400-4-11 x WSD 100 (1060x1060x70)1 x Helios ESA-1 Surface mounted Speed Control 1amp1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x VEKA INT 2000/15.0-L1 EKO1 x Flat Roof Terminal -OFT 5 - Asphalt1 x DA9/9-NT1 x 100mm Round Connector with Damper1 x Duct Termination with Mesh - 150mm1 x Duct Termination with Mesh - 450mm1 x CBA-100 Inlet Flange for CBT-1001 x KBA- Inlet Mounting 2251 x DDMP 12-12 3F 5700W M6M0 DG7
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...