• Model:CAB-315

Acoustic Box Fans (Inline) - CAB-315 RE

£ 692.54 (excl. VAT)

£ 831.05 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 2109 m3/h
Max Power: 360 Watts
Max Current: 1.5 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 33 Kgs
Part Num: 5148515100

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-315 RE Data Sheet

1 x Multileaf Volume Control Dampers -600/600 Rectangular Flanged1 x Motorised Volume Control Damper - 400mm1 x OBD 450x450 - for use with 4WAY-5951 x 204x60mm Elbow Bend with 125mm Fixed Spigot1 x Jetflow-HIT Metal inline - 200mm1 x Belt Drive Cased Axial Fan - 630mm - L version1 x 204x60mm 45 Degree Horizontal Bend1 x 150mm Round Connector1 x DV-ROF-V-315 Roof mounted unit1 x Belt Drive Cased Axial Fan - 500mm - H version1 x Jetflow-HIT Metal inline - 100mm1 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x Helios GigaBox 560mm GBW 560/4 centrifugal1 x 204x60mm 90 Degree Vertical Bend1 x Economy Airvent 100mm Fan with Timer/Humidistat/Pullcord1 x Airbrick Grille with flange - 204 x 60mm1 x AMCL1002 - LPHW coil only1 x HA-900 N Cooker Hood1 x Soler & Palau - HXTR/2-250/H - IP441 x 110 x 54mm Round to Rectangular Adaptor - Long1 x 200mm - 150mm Stainless Steel Ducting Reducer1 x ELTA - Three Phase Transformer 3amps1 x GX6 Wall Kit1 x ZAC- 350 -4-11 x Helios GigaBox 400mm GBD 400/4/4 centrifugal1 x Metal Inline Fan - VENT-400K - T (3 Phase)1 x Elta ACO Panel 149-ACO14E1 x Curved Blade Grille 600x600 (2way blow)1 x Soler & Palau - Contra Rotating TCBTx2-560 - IP651 x Soler & Palau TCBT/6-560/H - IP651 x B-flow Impeller HCBB/T-355mm1 x Raptor SDA560/6-1AC1 x Elta SLC560-1EC -IE5 Motor- IP551 x Elta Viper SCC Duct Mounted Centrifugal Fan - SCC630-1AC1 x Elta Cased Axial Flange - 400mm1 x Elta Cased Axial Flange - 1000mm1 x Elta Cased Axial Flange - 315mm1 x CBA-130 Inlet Flange for CBT-1301 x Elta Cased Axial Flange - 250mm1 x HV STYLVENT Wall Kit Threaded Rods1 x 1mtr Round Ducting - 100mm1 x Remote Timer Control - 13511 x Run On Timer - 5s - 4hrs - RT5A1 x BDRAX 250-E2 Cased Axial External Rotor Fan1 x CBT-170 Centrifugal1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x MD - Motor Protection Switch (3 Phase)1 x *VORT HRW 30 MONO Evo - Single Room Heat Recovery Unit,1 x EM 200-E2M 01- Etamaster-2001 x ACOFR9A-ADS-VFC - Automatic Duty Share Changeover panel1 x *TD EVO-100 - Environmentally Friendly Inline Fan*1 x 125mm Wall Duct - 350mm1 x Universal Pipe Fixing Clip1 x ISA-ILHT-500/560/630 - Anti-vibration mounts1 x SD-MUB Vibration pad set1 x 220x90mm 45 Degree Vertical Bend1 x 220x90mm Elbow Bend with 125mm Fixed Spigot1 x Soler & Palau TCBB/4-630/L - IP651 x Dektite Combo Pipe Flashing - DC210REC1 x PF 60- Passive Filter Element1 x FSD-TD 250mm Fire and Smoke Damper, Type C, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x HRB/4-500-25-BPN1 x HXP560/6-3 - 6 Pole - Three Phase1 x Soler & Palau - HXTR/4-560/H - IP541 x Duct Clamps box of 50 - 60mm - 270mm1 x Blast Gate (Manual) 250mm1 x FAST-TRACK RANGE 90mm - Semi-Rigid Duct 50M1 x AXC 315-6/11-2(B)-PV 300*C - Smoke Extract Fan1 x FAST-TRACK RANGE 75mm - Semi-Rigid Duct 50M1 x HD Series Control Damper - 2300mm X 1000mm1 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x Elta Variable Speed Drive IP66 - 1.5KW (1ph to 3ph)1 x AIRVENT speed control - AIR4019611 x Elta SLC900/4B-3AC - IP551 x Etamaster EM 250 EC 01 inline mix-vent fan1 x Etaline 250mm1 x Duct Mounted Filter Box With G2 Paper AND Metal Washable Filter - 150mm1 x COM-31 x Elta 3 Amp Electronic single phase speed controller.1 x TD4000 Mixvent - 355mm1 x TUNE-R-160-3-M6 - Control Damper1 x Spiral Ducting 3 Meters - 250mm1 x EM 315-E2M 01- Etamaster-3151 x U42K Screws for duct1 x Helios GigaBox 355mm GBD 355/4/4 centrifugal1 x HD-LL Series - 100mm with NFA-S2, Multi Voltage Damper Actuator
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 119.00

I've had 2 of these fans for 4 years now, and they are great...