• Model:CAB-315

Acoustic Box Fans (Inline) - CAB-315 RE

£ 727.17 (excl. VAT)

£ 872.60 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 2109 m3/h
Max Power: 360 Watts
Max Current: 1.5 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 33 Kgs
Part Num: 5148515100

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-315 RE Data Sheet

1 x 204x60mm Insulated Rectangular Horizontal 45° Bend1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x Transformer Speed Control - RTRE- 1.5Amp1 x 204x60mm Insulated Rectangular Vertical 45° Bend1 x MTS10- extractor fan 3 step switch3 x CBM 12-12 1100w 6P Three Phase1 x Elta - Room Sensor - Temp/Humid/C022 x 204x60mm Insulated Rectangular Vertical 90° Bend1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x Duct Termination with Mesh - 355mm2 x DEF-CBM-RE-7 - Protection Guard2 x CBA-100 Inlet Flange for CBT-1003 x SPI-100 C Iris damper3 x CBT-100N Centrifugal1 x CK-60F Kit2 x VTR 300 STD Filter Kit1 x Helios ESA-1 Surface mounted Speed Control 1amp1 x SD-MUB Vibration pad set1 x Singleflow SSDL315-1EC2 x WSD 100 (1060x1060x70)1 x AIRVENT speed control - AIR4019611 x Electrostatic Precipitator - 1H x 3W1 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C1 x Contactor Interface Station - CI91 x TUNE-R-200-3-M0 - Control Damper (NO ACTUATOR)1 x Vertical Cowl and Fan (Single Phase) - RAV400-4-13 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x CO2 Room Sensor - CO2-R1 x CFI In-line 150 - Carbon Filter1 x Helios RR-250-C Centrifugal inline fan3 x SAVE VSR 300 heat recovery unit1 x Silentub - STUB 1001 x Helios HQW-355/4 - IP551 x Duct Termination with Mesh - 100mm1 x DA9/9-NT1 x Comefri - TLZ 450 R - High Performance Scroll Fan2 x ACO8AC/EC AutoChangeover panel1 x VTR 500 STD Filter Kit1 x Flakt Woods ME 1.6 speed controller 6.0amp - EA9011591 x 100mm Round Connector with Damper1 x DS-2 2-Speed Switch (3 Phase)1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x Round ceiling diffuser 200mm2 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x CSB-60 Centrifugal fan1 x Round ceiling diffuser 250mm2 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x Elta SCP400/4-1AC - IP551 x TD160-NT Mixvent - 100mm - TD160 Timer1 x Binks Bullows - Spray Booth Filter1 x Flakt Woods ME 1.1 speed controller 1amp - EA9011571 x DDMP 12-12 3F 5700W M6M0 DG71 x IR24-P - Presence detector1 x Duct Termination with Mesh - 150mm
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 58.40

I have a loft mount extractor fan which was very noisy. I ...