• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 885.12 (excl. VAT)

£ 1,062.14 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

1 x FAST-TRACK RANGE 90mm - Semi-Rigid Duct 50M1 x HCFT/4-630mm plastic impeller plate fan1 x HRT/4-630/25-APN C21 x ECO-500 Kitchen Extract Fan1 x Ziehl GR40I-ZID.DC.CR plug fan1 x Male Ducting Connector - 400mm1 x Multiflow SEL400/4-1AC1 x Duct Clamps box of 50 - 60mm - 170mm1 x Metal Inline Fan - VENT-400K - T (3 Phase)1 x Plastic Kitchen Extractors - CK25N1 x Flexible PVC Ducting - 110x541 x FAST-TRACK RANGE 75mm - Straight Connector1 x Ducting T Piece Equal - 400mm1 x Atex Motor Protection Switch - U-EK230E EX1 x CPTA-E Flush mounted PIR sensor with timer1 x Elta SPA630/68-3AC - IP541 x Digital Room Thermostat - DRT1 x Soler & Palau - HCBT/6-630/H - IP651 x Elta SCP630-1EC - IP551 x ELS-GU Flush Mounted Casing1 x CBMT/Q 100-06 1 HEATER KIT1 x AXCBF 800D4-18 IE2 Bifurcated Axial Fans1 x Soler & Palau TCBB/6-560/L - IP651 x 220x90mm x 2m Insulated Rectangular Duct1 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x SEL355/2-1AC1 x CBMT/Q 315-120 3 HEATER KIT1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x AL 400 Mounting Feet (Pair)1 x GB-WSG 630 External Weather Louvers for the Giga-Box Fans - 630mm1 x Etaline 355mm - E2-011 x Spigot plate - 710mm1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x Soler & Palau TCBT/6-560/H - IP651 x Soler & Palau TCBB/4-560/H - IP651 x AL 1000 D4 mounting Feet (Pair)1 x Jetflow Silent SJMF-S 150-1EC1 x CTI CVA-N 250/315 Outdoor cover for CVAB/T Fans1 x Elta SLC560/2-3AC - IP551 x Biflow SB250-CON4-3 - High Temperature Bifurcated Fan1 x Capacitor 6uf for use with the EBM D4E range1 x Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 400mm1 x Spiral end cap - 150mm1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x Air Trak Heater-100mm1 x GB-WK Wall Bracket For Giga Box Fans - 400-630mm1 x GB-WSD 355 Weather Protection hood for the Giga-Box Fans - 355mm1 x Female Ducting Connector - 710mm1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x Clearance JPAK 100mm1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x Economy Airvent 100mm Fan with Timer/Humidistat/Pullcord1 x CBMT/Q 250-54 1 HEATER KIT1 x Centrifugal Roof Mounted Fans MAX-TEMP CTVB / CTVT Series - Vertical Discharge1 x GB-WSD 500 Weather Protection hood for the Giga-Box Fans - 500mm
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...