• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 929.38 (excl. VAT)

£ 1,115.26 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

2 x Vent Axia ACM 150 inline mixed flow duct fan1 x Vent Axia ACM 125 inline mixed flow duct fan1 x Run On Timer - 5s - 4hrs - RT5A2 x Remote Timer Control - 13513 x Elta 6 Amp Electronic single phase speed controller with TK1 x Push Timer Switch - ZA43 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x CS2 Current Switch1 x Time Delay Unit - DT20B4 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Multi Input Run On Timer - 0 - 20min - CFCU2 x Helios HQW-200/2 - IP555 x MWS 1.5 – Transformer Controller With Motor Protection1 x TTC-2000 Three phase electric heater controller1 x ACO8AC/EC AutoChangeover panel1 x 7 Day Programmable TIMECLOCK1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x BEAS-control module2 x MWS 3 – Transformer Controller With Motor Protection2 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven2 x COM-31 x MV-B Dual Switch for use with Helios HQW plate fans,2 x TG-K Duct temperature sensor4 x WS - Reversing Switch from Helios Fans2 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted3 x EC6H - Reversible Group Fan Electronic Controller2 x Isolator Switch - ISOSW2 x Transformer 5 Speed Controller - ATC1-12TK1 x Elta ACO Panel 149-ACO14E1 x Envirovent G4 Filter - SL-G4/F72 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE2 x TG-K3/NTC10-01 - Duct temperature sensor1 x CONTROL ECOWATT - Basic1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x Helios HQW-630/4 - IP551 x Transformer (silent) speed controller - RE 1.5 Amp1 x EM30-24 Electro-Mechanical Control Panel1 x EC-Vent control board3 x Electronic extractor fan speed controller - FSC 1.53 x Airvent ceiling fan controller2 x Vent Axia T-Series Controller4 x Transformer (silent) speed controller - RE 3.0 Amp1 x ACO 149-ACO1/EDV2 x Helios HQW-200/4 - IP551 x Transformer Speed Control - RTRE- 12.0Amp1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Elta ACO Panel 149-ACO18B1 x Speed Controller - REB52 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)3 x Systemair Save Connect 2.0 Internet Module2 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x Quietflow SQS400-1ECL - Centrifugal Box Fan1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x Two Speed Switch - REGUL-21 x EC-Vent Room Unit1 x DEF-140T Inlet Guard for the CBT-100N2 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan2 x MTP 10, 10K, Speed control1 x EM30-24 Control Panel Commissioning Service1 x Helios PU10 Speed Potentiometer (Flush Mounted)2 x TG-R room temperature sensor4 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR2 x Elta Variable Speed Drive IP66 - 2.2KW1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection2 x RDH FLEX-SQUARE - ADH/RDH 04501 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x Speed Controller - REB101 x REB-CVF 0-10v Controller1 x QPTW 250C Acoustic Twin Fan with Controller1 x Silent 100 Window Kit - windowS2 x Isolator Switch - EFF-ISO2 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Transformer (silent) speed controller - RE 5.0 Amp1 x CBM 9-9 550w 4P VR (Open Motor)1 x Transformer Speed Control - RTRE- 1.5Amp1 x UB47- Universal Insulated Terminal1 x MTS10- extractor fan 3 step switch1 x Transformer 5 Speed Controller - ATC1-2TK1 x Helios RR-250-C Centrifugal inline fan1 x Helios HQW-250/4 - IP551 x LFBR 315 G4 - Helios Inline Filter Box - 315mm1 x Vent Axia Silent 100T (TIMER)1 x Speed Controller - REB1-N1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x TUNE-R-200-3-M4 - Control Damper1 x CBS-60 Outlet Flange for CSB/CBT-601 x Transformer Speed Control - RTRE- 7.0Amp1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x Multiflow SMB550/4-1AC1 x CBA-60 Inlet Flange for CBT-601 x Elta Variable Speed Drive IP66 - 0.75KW1 x Elta 6 Amp Electronic single phase speed controller.1 x Transformer speed controller - ATC1 - 1.5 Amps
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...