• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 885.12 (excl. VAT)

£ 1,062.14 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

1 x EBB-250 M DESIGN Centrifugal Extractor Fan1 x Duct Fast Clamps - 355mm1 x Spiral Ducting 1 meter - 150mm1 x HV Wall Mounted Belt Drive Fan 1250mm 220V to 240V / 50Hz 1.1kW - Single Phase1 x Helios GigaBox 355mm GBW 355/4 centrifugal1 x TD4000 Mixvent - 355mm1 x Female Ducting Connector - 200mm1 x Metal Inline Fan - VENT-355N1 x Curved boot - 200mm1 x Ducting T Piece Equal - 200mm1 x SEL355/2-1AC1 x Ducting 45 Degree Bend - 200mm1 x Decor 300-C Bathroom Fan1 x Soler & Palau - HCBB/4-400/H -IP65 - BFLOW1 x Decor 300-CRZ Bathroom Fan1 x EBB-250 T DESIGN Centrifugal Extractor Fan1 x Elta SPA400/4-1AC - IP541 x Elta SCP400/4-3AC - IP551 x "VX100" - Standard Bathroom Axial fan - 100mm1 x HCFT/4-400/H-BPN E20,P 0.25KW1 x Soler & Palau - HXBR/4-400/H - IP541 x HRB/4-400-BPN1 x HRB/4-400-APN1 x EuroSeries (ESP) - Plate Mounted Axial Fans 400-141 x Soler & Palau - HCBT/4-400/H - IP651 x EBB-250 HM DESIGN Centrifugal Extractor Fan1 x Soler & Palau - HCBB/6-400/H - IP651 x EBB-175 T DESIGN Centrifugal Extractor Fan1 x EB-100N S - Centrifugal Fan1 x Duct Humidistat - HS4_hdt1 x HR-500 DP Heat Exchange Unit1 x HCFB/4-315mm (B-FLOW Supply Air) plastic impeller plate fan1 x Kitchen Grease Filter - Mesh Type Non standard 450mmx450mmx22mm Actual1 x Acoustic Commercial Kitchen Inline Exhaust Fan - MPS (Three Phase) - 250mm1 x CBM-10/10 515 6P RE VR IP55 (230V50)F V51 x Airbrick Grille with flange - 204 x 60mm1 x Airvent ceiling fan controller1 x GB-WSG 630 External Weather Louvers for the Giga-Box Fans - 630mm1 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x FSD-TD 300 x 200 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM24-TF (SC)1 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-H1 x Belt Drive Cased Axial Fan - 800mm - L version1 x EVL Filter G4 grade for PIV units
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...