• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 929.38 (excl. VAT)

£ 1,115.26 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

1 x Etamaster EM 250 EC 01 inline mix-vent fan1 x CBMT/Q 250-54 1 HEATER KIT1 x Etamaster EM 250 EC 02 (high Power) inline mix-vent fan1 x Round ceiling diffuser 300mm1 x Round ceiling diffuser 250mm2 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven3 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Three Phase Transformer controllers - RMT 1.5 Amp3 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Helios TSW 0.3Amp Compact Transformer speed controller1 x Helios TSW 3 Amp Transformer speed controller1 x Vent Axia ACM 100 inline mixed flow duct fan2 x Envirovent 4 Way Remote Control Switch - SWHBKRF-42 x Vent Axia ACM 150 inline mixed flow duct fan1 x Helios TSW 1.5 Amp Transformer speed controller4 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan2 x CS2 Current Switch3 x DEF-140T Inlet Guard for the CBT-100N3 x Isolator Switch - ISOSW1 x MWS 3 – Transformer Controller With Motor Protection2 x Single phase speed controller by auto-transformer - RMB 3.5 Amp3 x Vent Axia ACM 125 inline mixed flow duct fan2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)3 x Multiflow SMB550/4-1AC3 x Elta 6 Amp Electronic single phase speed controller with TK1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Push Timer Switch - ZA41 x MV-B Dual Switch for use with Helios HQW plate fans,2 x BEAS-control module1 x Helios HQW-200/2 - IP552 x Systemair Save Connect 2.0 Internet Module1 x Transformer 5 Speed Controller - ATC1-12TK3 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box2 x MWS 1.5 – Transformer Controller With Motor Protection1 x 7 Day Programmable TIMECLOCK2 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x RDS 7 Helios Transformer Controller With Motor Protection1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp2 x Envirovent G4 Filter - SL-G4/F71 x Two Speed Switch - REGUL-23 x KMBI 250 Connector rectangular/circular to install on the discharge of CMT1 x RDS 11 Helios Transformer Controller With Motor Protection3 x Helios TSW 10 Amp Transformer speed controller3 x Helios TSW MCB Amp Transformer speed controller2 x WS - Reversing Switch from Helios Fans4 x TG-K3/NTC10-01 - Duct temperature sensor2 x Helios HQW-630/4 - IP553 x CBS-60 Outlet Flange for CSB/CBT-601 x FAST-TRACK RANGE 90mm - Click Ring (1 bag of 10)1 x Insulated extract Plenum 8+11 x Insulated extract Plenum 6+11 x Helios TSW 7.5 Amp Transformer speed controller2 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT3 x Single phase speed controller by auto-transformer - RMB 1.5 Amp2 x Helios HQW-200/4 - IP553 x Transformer (silent) speed controller - RE 3.0 Amp1 x Airvent ceiling fan controller1 x Skyflow SSR Horizontal Roof Cowl SSR31/35B2 x Transformer (silent) speed controller - RE 1.5 Amp3 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven2 x Electronic extractor fan speed controller - FSC 1.51 x RTRD - Three Phase Speed Controller - 2 Amp1 x Remote Timer Control - 13511 x Speed Controller - REB32 x Speed Controller - REB51 x Commercial Single or 3 phase Fan Reversing Switch - RS13 x TG-R room temperature sensor2 x Vent Axia ACM 200 inline mixed flow duct fan1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)2 x KKS 100 silencer-section - For use with the MUB 100 size Fans.2 x TEM 075 - 5 Speed Transformer Speed Control2 x Elta 3 Amp Electronic single phase speed controller with TK1 x Elta Variable Speed Drive IP66 - 0.75KW1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Speed Controller - REB101 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x SG-200 Fan Guard for the HQW 2002 x DDMP 09-09 3F 2130W M6A4 DG02 x MTP 10, 10K, Speed control1 x Transformer 5 Speed Controller - ATC1-8TK1 x Speed Controller - REB61 x REB-CVF 0-10v Controller3 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x Helios HQW-315/4 - IP551 x Transformer 5 Speed Controller - ATC1-2TK1 x Transformer Speed Control - RTRE- 7.0Amp1 x Speed Controller - REB1-N1 x Silent 100 Window Kit - windowS1 x ELM 18 EX Flexible Cuff for ERM 181 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x Transformer Speed Control - RTRE- 5.0Amp1 x 220x90mm Insulated Rectangular Vertical 45° Bend1 x TD Mixvent 800/200 EEXEIIT31 x Vent Axia Silent 100T (TIMER)
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...