• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 929.38 (excl. VAT)

£ 1,115.26 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

1 x Mini Diffuser - 100mm1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x PM230-TF, AC 230V Damper Actuator, Spring Return, 2 x SPDT, 72C Thermal Fuse1 x Speed Controller - REB51 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x Potentiometer EGH 01 - for DDMP Fans1 x EBM-Papst D2E097-BK76-98 Double inlet1 x Electronic extractor fan speed controller - FSC 1.51 x Helios HQW-250/4 - IP551 x Transformer Speed Control - RTRE- 1.5Amp1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x DDMP 10-08 FLANGE1 x Helios HQW-200/2 - IP551 x ADH E0-280 Flange - 0280 ADHE/RDHE1 x ERR 20/1 Centrifugal inline fan1 x Transformer 5 Speed Controller - ATC1-4TK1 x TEM 035 - 5 Speed Transformer Speed Control1 x CS2 Current Switch3 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Helios TSW 1.5 Amp Transformer speed controller1 x Speed Controller - REB31 x RDS 7 Helios Transformer Controller With Motor Protection1 x MV-B Dual Switch for use with Helios HQW plate fans,1 x Helios TSW 0.3Amp Compact Transformer speed controller2 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x RDS 11 Helios Transformer Controller With Motor Protection1 x KMBI 315 Connector rectangular/circular to install on the discharge of CMT1 x REE-1 Electronic Speed Controller1 x RR EC 160 Centrifugal inline fan - Energy Efficient Motor1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x CBS-60 Outlet Flange for CSB/CBT-601 x Helios HQW-200/4 - IP552 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-8TK1 x MWS 3 – Transformer Controller With Motor Protection1 x Transformer 5 Speed Controller - ATC1-10TK1 x Helios TSW 3 Amp Transformer speed controller1 x TEM 075 - 5 Speed Transformer Speed Control1 x RRB- transformer controller1 x Transformer 5 Speed Controller - ATC1-2TK1 x Vortice Quadro Micro 100 I - Standard Version1 x Skyflow SSR Horizontal Roof Cowl SSR31/35B1 x Transformer (silent) speed controller - RE 1.5 Amp1 x CBA-60 Inlet Flange for CBT-601 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x Transformer Speed Control - RTRE- 7.0Amp1 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x MTS10- extractor fan 3 step switch1 x DEF-CBM-RE-7 - Protection Guard1 x KMBI 250 Connector rectangular/circular to install on the discharge of CMT1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...