• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 885.12 (excl. VAT)

£ 1,062.14 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

1 x Air Quality Sensor - AQS1 x Ducting 60 Degree Bend - 500mm1 x Flanged Spigot - 500mm1 x DTV200 - Differential Pressure Switch1 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x CS2 Current Switch1 x Atex Motor Protection Switch - U-EK230E EX1 x STF1 Oscillating Tower Fan1 x Airvent Ceiling Sweep Fan - 36 inch - 4441221 x AES-Fire control unit1 x GORDON W 30/12″ ET Oscillating wall mounted fan with remote control1 x HCF - Ceiling Fan 1400mm (56 inch)1 x Differential Pressure Switch - 200 - 1000 Pa - IP541 x EC-Basic-T temperature1 x Ducting 90 Degree Bend - 500mm1 x Ducting 15 Degree Bend - 500mm1 x CAB-125B - High Pressure Acoustic Fan1 x Airvent Ceiling Sweep Fan - 48 inch - 4441231 x KVK Slim 125 - Low profile Semi Acoustic Box Fan1 x Hydor Typhoon Circulation Fans - HVFB - 450mm1 x CO2 Room Sensor - CO2-R1 x HCF - Ceiling Fan 1200mm (48 inch)1 x Airvent Ceiling Sweep Fan - 56 inch - 4441241 x Female Ducting Connector - 500mm1 x Duct Split Rings (Pair) -500mm1 x Desk fan 9 inch - SFG91 x Singleflow SSDL125-1EC1 x Differential Pressure Switch - 50 - 500 Pa - IP541 x Spiral end cap - 500mm1 x Pressed Ducting Saddle - 500mm1 x HCF - Ceiling Fan 900mm (36 inch)1 x Male Ducting Connector - 500mm1 x Jetflow-HIT Metal inline - 125mm1 x Belt Drive Cased Axial Fan - 500mm - H version1 x Elta SLC500/4B-3AC - IP551 x Elta SLC900/4A-3AC - IP551 x Ducting Y Piece - 315mm1 x Etaline 280mm1 x Etaline Max-Fan - 315mm - E2 011 x 220x90mm 90 Degree Vertical Bend1 x Ducting 45 Degree Bend - 315mm1 x Soler & Palau TCBB/4-560/H - IP651 x Ducting 45 Degree Bend - 500mm
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...