• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 885.12 (excl. VAT)

£ 1,062.14 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

1 x Male Ducting Connector - 200mm1 x Ducting Y Piece - 100mm1 x Chaysol da 10-10 - 550watt1 x Flexible PVC Ducting - 220x901 x CBP-18/181 x Duct Mounted Filter Box - G4 Grade Panel - 200mm2 x 150mm Round Connector1 x Spiral Ducting 3 Meters - 150mm1 x Ducting Reducers Long - 300mm-250mm1 x 150mm Wall Duct - 350mm1 x 3 in 1 Portable Air Conditioner - 1500w1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 373watt CVR1 x DA9/9 Feet1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x CBP-10/10 LOW PRESSURE CENTRIFUGAL FAN1 x 125mm Round Wall Plate1 x Elta 3 Amp Electronic single phase speed controller with TK1 x CBP-9/7-RC1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x 2mtr Round Ducting - 125mm1 x Elta 6 Amp Electronic single phase speed controller.1 x Synthetic Air Filter Media - 6mm x 1000mm x 1000mm1 x 125mm Wall Duct - 350mm1 x Duct Quick Suspension Rings with Clasp - 200mm1 x KRJ - 250 Inlet Guard1 x Elta SLC560-1EC -IE5 Motor- IP551 x SG-200 Fan Guard for the HQW 2001 x Gripple HVAC Hanger Range - Loop Fast - LF1 - 1mtr1 x 150mm Round Connector with Damper1 x Elta Short Cased ATEX Axial fan - SCX050L2-A9/161 x 5-Speed Controller for use with Elta SAX Classic Fans1 x RTRD - Three Phase Speed Controller - 2 Amp1 x 150mm Round Wall Plate1 x ELTA - Single Phase Transformer 10amps1 x Elta 2 Amp Electronic single phase speed controller.2 x CBA-60 Inlet Flange for CBT-601 x ILHT-560/MV - Inlet & Outlet Mounting Flange Kit1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x Elta Cased Axial Flange - 315mm1 x Elta SCP560/4-1AC - IP551 x DDMP 07/07 Mounting Flange1 x Elta Cased Axial Flange - 250mm1 x K 315 L Sileo Metal Tube Fan1 x KBA- inlet mounting flange for CRMT 2251 x SAVE VSR 300 heat recovery unit1 x TechSeal 100FR Duct Sealant Cartridge - 100FRS1 x KBD- outlet mounting flange for CRMT 3551 x Elta SPA630/6-1AC - IP541 x JBR N - 630 Flange to suit CRHB/CTHB roof fans1 x Cased Axial Fan Extension - 400mm dia1 x Elta Powder Coated Cased Axial Flange - 630mm1 x DDMP 10-10 FLANGE1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x ELTA - Single Phase Transformer 16amps1 x Flanged Spigot - 315mm1 x Elta EC Electronic Controller1 x CBS-80 Outlet Flange for CBT-801 x Elta Variable Speed Drive IP66 - 1.5KW (1ph to 3ph)1 x AIRVENT speed control - AIR4019611 x USD-4000 Rect to Circ coupling Flange For KABB/T kitchen fans1 x Duct Termination with Mesh - 315mm1 x Elta Cased Axial Flange - 450mm1 x ELTA - Single Phase Transformer 12amps
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...