• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 929.38 (excl. VAT)

£ 1,115.26 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Vent Axia T-Series Controller1 x ACO 149-ACO1/EDV1 x BEAS-control module6 x Transformer (silent) speed controller - RE 3.0 Amp1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x CS2 Current Switch3 x Elta 6 Amp Electronic single phase speed controller with TK2 x Helios HQW-630/4 - IP551 x EM30-24 Electro-Mechanical Control Panel1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x REE-1 Electronic Speed Controller2 x Helios HQW-200/2 - IP551 x EC-Vent Room Unit3 x TG-K3/NTC10-01 - Duct temperature sensor2 x Single phase speed controller by auto-transformer - RMB 8.0 Amp4 x WS - Reversing Switch from Helios Fans4 x Helios HQW-200/4 - IP551 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Elta ACO Panel 149-ACO18B1 x Systemair Save Connect 2.0 Internet Module3 x MWS 1.5 – Transformer Controller With Motor Protection1 x Transformer (silent) speed controller - RE 1.5 Amp1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5002 x COM-31 x Transformer Speed Control - RTRE- 7.0Amp4 x Electronic extractor fan speed controller - FSC 1.51 x CBM 9-9 550w 4P VR (Open Motor)1 x Helios HQW-315/4 - IP552 x Quietflow SQS400-1ECL - Centrifugal Box Fan4 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x Transformer Speed Control - RTRE- 1.5Amp1 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x MTS10- extractor fan 3 step switch1 x Speed Controller - REB102 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Envirovent G4 Filter - SL-G4/F71 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x TG-K Duct temperature sensor1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x DEF-CBM-RE-7 - Protection Guard2 x Transformer 5 Speed Controller - ATC1-12TK1 x Transformer (silent) speed controller - RE 5.0 Amp1 x EBM-Papst D4E225-BC01-17 Double inlet1 x Remote Timer Control - 13511 x Two Speed Switch - REGUL-22 x Elta Variable Speed Drive IP66 - 0.75KW1 x Isolator Switch - EFF-ISO2 x Transformer Speed Control - RTRE- 12.0Amp1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Speed Controller - REB51 x REE-2 Electronic Speed Controller1 x Vent Axia SC5001 - Speed controller1 x QPTW 250C Acoustic Twin Fan with Controller1 x Elta 6 Amp Electronic single phase speed controller.1 x SG-200 Fan Guard for the HQW 2001 x Speed Controller - REB1-N1 x Elta Wall Cowl SWC56/631 x EBM-Papst D3G133-BF05-14 Double inlet1 x Multiflow SMB550/4-1AC1 x MTP 10, 10K, Speed control1 x TUNE-R-200-3-M1 - Control Damper1 x Speed Controller - REB11 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Skyflow SSR Horizontal Roof Cowl SSR31/35B1 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Speed controller with Reverse - REB-1R1 x 7 Day Programmable TIMECLOCK1 x REB-CVF 0-10v Controller1 x VTR 300 STD Filter Kit1 x DDMP 12-12 3F 1810W M6A4 DG01 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Transformer speed controller - ATC1 - 1.5 Amps1 x MEV Spider Wireless boost Switch - MEV-SWH-W
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 178.68

Excellent low noise fan, I've got one unit running years and...