• Model:CAB-355

Acoustic Box Fans (Inline) - CAB-355 RE

£ 885.12 (excl. VAT)

£ 1,062.14 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3200 m3/h
Max Power: 860 Watts
Max Current: 4.1 Amps
Sound pressure Level (dB(A))@3m: 42db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550400

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-355 RE Data Sheet

1 x Anti Vibration Duct Suspension Rings - 355mm1 x Ducting Y Piece - 355mm1 x Spiral end cap - 355mm1 x ISOR 250 EC 201 x Acoustic Box Fans (Inline) - CAB-250N1 x Additional Delivery Surcharge1 x QP315C Acoustic Fan - 315mm1 x Differential Pressure Switch - 50 - 500 Pa - IP541 x Female Ducting Connector - 355mm1 x Sentinel D-BOX 150S/CP1 x Additional shipping charge for offshore islands1 x CO2 Room Sensor - CO2-R1 x Helios VARD 355/2/2-TK1 x Duct Suspension Rings - 355mm1 x Spiral Ducting 3 Meters - 355mm1 x Delivery Surcharge1 x Flanged Spigot - 355mm1 x Speed Controller - REB11 x HRT/4-500/25-BPN C1 x Elta SLC355/4-3AC - IP551 x HXP500/4-1 - 4 Pole - Single Phase1 x Duct Humidistat - HS3_hdt1 x Differential Pressure Switch - 100 - 1000 Pa - IP651 x Elta SPA500/4-1AC - IP541 x Raptor SDA630/4-1EC1 x DOL Starter with Isolator - Three phase1 x Activated Carbon Discarb Cell - Grade 50 - EXTRA DUTY - 445H x 445W x 595Dmm ACTUAL1 x GB-WSG 355 External Weather Louvers for the Giga-Box Fans - 355mm1 x Commercial Activated Carbon Filters - Panel Type - 24" x 24" x 2" - ACP1 x Belt Drive Cased Axial Fan - 630mm - L version1 x 204x60mm Elbow Bend with 100mm Fixed Spigot1 x Spigot plate - 100mm1 x 100mm - 125mm Round Reducer1 x 204x60mm 90 Degree Horizontal Bend1 x Elta SCP250-1EC - IP551 x 100mm Round Connector with Damper1 x Rotorex HXBR 250mm Plate Axial Fan - Single Phase (2-pole)1 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x 204x60mm Elbow Bend with 125mm Fixed Spigot1 x Control switch - CR1501 x IP65 Remote Speed Adjustment Station1 x Flanged Spigot - 100mm1 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x Soler & Palau TCBT/4-710/H - IP651 x Helios - HQD 250/21 x Elta SLC710/4B-3AC - IP551 x U42K Screws for duct1 x Galvanised Banding1 x 204x60mm Equal T Piece1 x Spiral Ducting 3 Meters - 100mm1 x MEV Spider Wireless boost Switch - MEV-SWH-W1 x Soler & Palau TCBT/4-630/L - IP651 x Belt Drive Cased Axial Fan - 710mm - L version1 x Soler & Palau TCBT/4-710/L - IP651 x 100mm Wall Duct - 350mm1 x 100mm Round Wall Plate1 x Shoed T Piece Equal -100mm1 x Activated Carbon Discarb Cell - 598H x 598W x 598Dmm1 x Compact SCD630/4-3AC1 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x ACOFR9A-ADS-VFC - Automatic Duty Share Changeover panel
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...