• Model:CAB-400RE

Acoustic Box Fans (Inline) - CAB-400 RE

£ 934.92 (excl. VAT)

£ 1,121.90 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3082 m3/h
Max Power: 870 Watts
Max Current: 4.09 Amps
Sound pressure Level (dB(A))@3m: 41db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-400 RE Data Sheet

1 x Ducting 90 Degree Bend - 150mm1 x Duct Termination with Mesh - 150mm1 x Duct Fast Clamps - 150mm1 x Anti Vibration Duct Suspension Rings - 150mm1 x Curved boot - 150mm1 x Spiral Ducting 1 meter - 150mm1 x Spigot plate - 150mm1 x Spiral Duct Grille Termination - 150mm1 x Flanged Spigot - 150mm1 x Ducting 15 Degree Bend - 150mm1 x Rapid Lock Spiral Duct Clamps - 150mm1 x Spiral Ducting 3 Meters - 150mm1 x Ducting Y Piece - 150mm1 x Female Ducting Connector - 150mm1 x Duct Quick Suspension Rings with Clasp - 150mm1 x Ducting T Piece Equal - 150mm1 x Ducting 30 Degree Bend - 150mm1 x Ancillary Sealing Band - 150mm1 x Ducting 45 Degree Bend - 150mm1 x Male Ducting Connector - 150mm2 x Speed Controller - REB102 x Remote Timer Control - 13512 x Helios TSW 3 Amp Transformer speed controller2 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x Vent Axia ACM 150 inline mixed flow duct fan1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x EBM-Papst D2E097-BK76-98 Double inlet2 x Multi Input Run On Timer - 0 - 20min - CFCU2 x Push Timer Switch - ZA41 x RDS 11 Helios Transformer Controller With Motor Protection1 x RTRD - Three Phase Speed Controller - 2 Amp1 x RDS 7 Helios Transformer Controller With Motor Protection1 x Helios TSW MCB Amp Transformer speed controller1 x Helios TSW 1.5 Amp Transformer speed controller1 x Helios TSW 10 Amp Transformer speed controller1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Transformer speed controller - ATC1 - 1.5 Amps1 x Systemair Save Connect 2.0 Internet Module1 x Vent Axia ACM 125 inline mixed flow duct fan1 x Transformer 5 Speed Controller - ATC1-8TK1 x MWS 3 – Transformer Controller With Motor Protection1 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans3 x DEF-140T Inlet Guard for the CBT-100N2 x CS2 Current Switch1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x 5-Speed Controller for use with Elta SAX Classic Fans2 x Elta 6 Amp Electronic single phase speed controller with TK1 x ERR 20/1 Centrifugal inline fan2 x 7 Day Programmable TIMECLOCK1 x FAST-TRACK RANGE 90mm - Adaptor For Distribution Box1 x Elta 3 Amp Electronic single phase speed controller with TK2 x WS - Reversing Switch from Helios Fans2 x MWS 1.5 – Transformer Controller With Motor Protection1 x Two Speed Switch - REGUL-21 x ERR 31/1 Centrifugal inline fan2 x Electronic extractor fan speed controller - FSC 1.51 x Transformer 5 Speed Controller - ATC1-10TK2 x MV-B Dual Switch for use with Helios HQW plate fans,1 x BEAS-control module1 x Helios HQW-630/4 - IP552 x Transformer (silent) speed controller - RE 3.0 Amp1 x CBS-60 Outlet Flange for CSB/CBT-601 x TG-K3/NTC10-01 - Duct temperature sensor2 x Helios HQW-200/4 - IP551 x Speed Controller - REB31 x FAST-TRACK RANGE 90mm - Click Ring (1 bag of 10)2 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted2 x Transformer (silent) speed controller - RE 1.5 Amp1 x Skyflow SSR Horizontal Roof Cowl SSR31/35B1 x TG-R room temperature sensor2 x Speed Controller - REB52 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Transformer Speed Control - RTRE- 5.0Amp1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Transformer (silent) speed controller - RE 5.0 Amp2 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x Airvent ceiling fan controller1 x Transformer Speed Control - RTRE- 7.0Amp1 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x Speed Controller - REB61 x Helios HQW-315/4 - IP551 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x Elta Variable Speed Drive IP66 - 0.75KW1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Vent Axia ACM 200 inline mixed flow duct fan1 x CBM 9-9 550w 4P VR (Open Motor)1 x Speed Controller - REB1-N1 x MTS10- extractor fan 3 step switch1 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...