• Model:CAB-400RE

Acoustic Box Fans (Inline) - CAB-400 RE

£ 934.92 (excl. VAT)

£ 1,121.90 (inc. VAT)

The CAB Acoustic inline fan series is manufactured by S&P and continuing their range of quiet fans, this range of attenuated cabinet fans are specifically designed to provide extract ventilation solutions for noise sensitive environments. The range comprises of six nominal sizes.

In the larger sizes these fans are quieter than the mixvent fans and develop more pressure. (See sound levels below)

Max Airflow: 3082 m3/h
Max Power: 870 Watts
Max Current: 4.09 Amps
Sound pressure Level (dB(A))@3m: 41db - Radiated
Temperature Range: -20/+40*C
Weight: 35 Kgs
Part Num: 5148550500

Compare these to other inline box fans with the same measure, (dB @ 3M) and they come out on top. Also made of metal and not anything that is a fire risk such as MDF or wood! Combined with an attenuator these are as quiet as you can get for the money.

All models incorporate single phase, 230V 50Hz, direct drive low pressure centrifugal fans available in two (2) or four (4) pole speeds. All models are supplied with a remote mounting wiring outlet box to facilitate installation and connection to external controls.

Applications
They are suitable for many general ventilation applications where the noise level of the ventilation system is of particular importance. Typical applications would include ventilation systems for:
- Commercial offices.
- Restaurants and cafes.
- Libraries and public buildings etc.

Construction
Casing
The fan casings are manufactured from heavy gauge galvanised sheet steel and internally lined with an acoustic insulation material. All models incorporate inlet and discharge circular duct connection flanges with integrated rubber air seal. The specific design of the products enables a cover to be removed and the motor / impeller assembly accessed without the requirement of removing the fan casing from the ducting. The fan cover is supplied as standard with quick-fix fixings to enable fast removal or fitting without tools. All models are also supplied with four mounting feet to facilitate any ceiling, wall or floor mounting installation.
Motor / Impeller
All models incorporate a single phase, 230V 50Hz, direct-drive low pressure forward curved centrifugal fan (with scroll). All motors included in the CAB range are of, enclosed, type and are fully speed controllable using voltage regulation.

>

PDF Files


CAB Series Data Sheet


CAB-400 RE Data Sheet

1 x Single phase speed controller by auto-transformer - RMB 1.5 Amp1 x Isolator Switch - ISOSW1 x Two Speed Switch - REGUL-23 x Vent Axia T-Series Controller2 x Transformer Speed Control - RTRE- 12.0Amp2 x Helios HQW-630/4 - IP556 x Transformer (silent) speed controller - RE 3.0 Amp1 x BEAS-control module2 x Single phase speed controller by auto-transformer - RMB 8.0 Amp1 x Helios HQW-200/2 - IP552 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted3 x TG-K3/NTC10-01 - Duct temperature sensor1 x Elta ACO Panel 149-ACO18B2 x Remote Timer Control - 13511 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection4 x MWS 1.5 – Transformer Controller With Motor Protection2 x Systemair Save Connect 2.0 Internet Module1 x EC-Vent Room Unit5 x Helios HQW-200/4 - IP551 x Envirovent G4 Filter - SL-G4/F71 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven4 x WS - Reversing Switch from Helios Fans2 x EC6H - Reversible Group Fan Electronic Controller1 x EM30-24 Control Panel Commissioning Service1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x Transformer (silent) speed controller - RE 1.5 Amp1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5002 x Airvent ceiling fan controller3 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x Easy-fix termination kit - High Rise Ventilator - EFT2 x Speed Controller - REB52 x Electronic extractor fan speed controller - FSC 1.52 x TG-R room temperature sensor1 x Transformer Speed Control - RTRE- 7.0Amp2 x Helios PU10 Speed Potentiometer (Flush Mounted)3 x Elta Variable Speed Drive IP66 - 0.75KW1 x Helios HQW-315/4 - IP551 x DEF-140T Inlet Guard for the CBT-100N1 x Speed Controller - REB101 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3552 x Multiflow SMB550/4-1AC1 x Isolator Switch - EFF-ISO1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x Transformer 5 Speed Controller - ATC1-12TK1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp3 x SG-200 Fan Guard for the HQW 2001 x Quietflow SQS400-1ECL - Centrifugal Box Fan1 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR1 x REE-1 Electronic Speed Controller1 x Transformer Speed Control - RTRE- 1.5Amp1 x Transformer 5 Speed Controller - ATC1-2TK1 x CBM 9-9 550w 4P VR (Open Motor)2 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)2 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x MTS10- extractor fan 3 step switch1 x Elta Variable Speed Drive IP66 - 2.2KW1 x REB-CVF 0-10v Controller1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Transformer (silent) speed controller - RE 5.0 Amp1 x EBM-Papst D4E225-BC01-17 Double inlet1 x Vent Axia Silent 100T (TIMER)1 x Elta Wall Cowl SWC56/631 x MTP 10, 10K, Speed control
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 58.40

I have a loft mount extractor fan which was very noisy. I ...