• Model:MPS

Acoustic Commercial Kitchen Inline Exhaust Fan - MPS - (Single Phase)

£ 678.46 (excl. VAT)

£ 814.15 (inc. VAT)

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility.
Weather housings and also available making them suitable for outdoor mounting.

EC (energy efficient & with integrated speed control) versions also available, ask for details.
* Motor can be regulated using voltage reduction.
* Terminal connections for thermal contacts.
* IP 54 degree of protection for closed housing covers as well as duct connections fitted on the inlet and outlet sides.
* Models 225-E2 ~ 280-E2 supplied with 2-pole motors.
* Models 400-E4 ~ 560-E4 supplied with 4-pole motors.
* Max. medium temperature 120°C
* Motor outside of air stream
* Speed controllable
* Swing-out fan unit
* With condensate and grease drain

Mounting instructions
* Installation with upward, right-hand or left-hand exhaust socket.
* If the unit is mounted with the exhaust socket pointing to the left or the right, the service door must be altered by the customer.

Model 225-E2 has a 200mm spigot. Max Airflow 1465 m3/hr
Model 250-E2 has a 250mm spigot. Max Airflow 2491 m3/hr
Model 280-E2 has a 315mm spigot. Max Airflow 3390 m3/hr
Model 315-E2 has a 354mm spigot Max Airflow 4400 m3/hr
Model 400-E4 has a 354mm spigot. Max Airflow 4348 m3/hr
Model 450-E4 has a 354mm spigot. Max Airflow 5770 m3/hr
Model 500-E4 has a 400mm spigot. Max Airflow 7780 m3/hr
All above at free air.

PDF Files


Specification, installation and operating instructions


DIMENSIONAL SPECS

Available Options

2 x 110 x 54mm Low Profile Plastic Ducting - 1 Meter1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x Male Ducting Connector - 450mm1 x Helios PA10 Speed Potentiometer1 x Flanged Spigot - 200mm1 x Flanged Spigot - 250mm1 x Female Ducting Connector - 200mm1 x Balance S Diffuser - NO RING - 100mm1 x Spiral Ducting 3 Meters - 125mm1 x Galvanised Banding1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-900-B 5.5kw1 x Ducting 90 Degree Bend - 80mm1 x Soler & Palau - HCBT/4-800/H-B FLOW ( Supply Air Fan) - IP551 x Anti Vibration Duct Suspension Rings - 125mm1 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x Capacitor 4uf for use with the EBM A2E range1 x G2 duct mounted panel filter 100-1601 x Female Ducting Connector - 450mm1 x 220x90mm Flat Channel Connector1 x DEF-800AN2 x Flanged Spigot - 80mm1 x Ducting 45 Degree Bend - 125mm1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x Female Ducting Connector - 160mm1 x JBS-1250 Flat Roof Upstand for HCTT/4-1000/B1 x Helios SB EC 125 A SilentBox Centrifugal Fan1 x PIR Sensor - PIR41 x Speed Controller - REB11 x 125mm Wall Duct - 350mm1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x Flanged Spigot - 150mm1 x Anti Vibration Duct Suspension Rings - 80mm1 x 110 x 54mm Short Rectangular to Round Adaptor male1 x Male Ducting Connector - 200mm1 x 110 x 54mm Flat Channel Clip (Pack Of 5)1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Spiral end cap - 80mm1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x Spiral end cap - 100mm1 x Female Ducting Connector - 355mm1 x Flanged Spigot - 315mm1 x Anti Vibration Duct Suspension Rings - 100mm1 x 100mm Round 90 Degree Bend1 x Anti Vibration Duct Suspension Rings - 250m1 x Male Ducting Connector - 300mm1 x Capacitor 6uf for use with the EBM D4E range1 x 1mtr Round Ducting - 125mm1 x Female Ducting Connector - 315mm1 x Anti Vibration Duct Suspension Rings - 315mm1 x Duct Suspension Rings - 160mm1 x 150mm Wall Duct - 350mm1 x Rectangular Airbrick Adaptor1 x Female Ducting Connector - 250mm1 x 150mm Round Connector with Damper1 x Male Ducting Connector - 180mm1 x Clearance JPAK 100mm1 x Ducting 45 Degree Bend - 100mm1 x Acopel F400-630/160
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...