• Model:MPS

Acoustic Commercial Kitchen Inline Exhaust Fan - MPS - (Single Phase)

£ 678.46 (excl. VAT)

£ 814.15 (inc. VAT)

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility.
Weather housings and also available making them suitable for outdoor mounting.

EC (energy efficient & with integrated speed control) versions also available, ask for details.
* Motor can be regulated using voltage reduction.
* Terminal connections for thermal contacts.
* IP 54 degree of protection for closed housing covers as well as duct connections fitted on the inlet and outlet sides.
* Models 225-E2 ~ 280-E2 supplied with 2-pole motors.
* Models 400-E4 ~ 560-E4 supplied with 4-pole motors.
* Max. medium temperature 120°C
* Motor outside of air stream
* Speed controllable
* Swing-out fan unit
* With condensate and grease drain

Mounting instructions
* Installation with upward, right-hand or left-hand exhaust socket.
* If the unit is mounted with the exhaust socket pointing to the left or the right, the service door must be altered by the customer.

Model 225-E2 has a 200mm spigot. Max Airflow 1465 m3/hr
Model 250-E2 has a 250mm spigot. Max Airflow 2491 m3/hr
Model 280-E2 has a 315mm spigot. Max Airflow 3390 m3/hr
Model 315-E2 has a 354mm spigot Max Airflow 4400 m3/hr
Model 400-E4 has a 354mm spigot. Max Airflow 4348 m3/hr
Model 450-E4 has a 354mm spigot. Max Airflow 5770 m3/hr
Model 500-E4 has a 400mm spigot. Max Airflow 7780 m3/hr
All above at free air.

PDF Files


Specification, installation and operating instructions


DIMENSIONAL SPECS

Available Options

1 x RUCK MTP 20, 10K, Speed control1 x HCFB/4-450mm plastic impeller plate fan1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x HCFB/4-315mm plastic impeller plate fan1 x Etamaster EM 200 EC 01 inline mix-vent fan1 x FSD-C Motorised Failsafe Single Blade Fire/Smoke Damper with Actuator - 180mm1 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)2 x Ancillary Pack for SLC-710 for 4 pole Motors1 x Mounting Feet (Pair) for SLC-450-060B-04502 x Ancillary Pack for SB-Biflow 250 model1 x ELS-GU Flush Mounted Casing1 x FAST-TRACK RANGE 90mm - Semi-Rigid Duct 50M1 x PPF4 - Positive Pressure Supply Fan1 x ELM 25 EX Flexible Cuff for ERM 2501 x GX6 Wall Kit1 x Eco-Loft Positive Input Ventilation System - PIV Loft Mounted -EVL-H1 x FU 075 04 Frequency Inverter (IP20)1 x Atex Inline Fan 250mm - ERM25EXE1 x Impeller Side Guard - 315mm1 x Mounting Feet (Pair) for SLC-400-060-04001 x Ducting 90 Degree Bend - 150mm1 x MEV 160 & 300 FT (FastTrack) Additional Spigots1 x Elta SLC400/4-3AC - IP551 x EVL Filter G4 grade for PIV units1 x FUM Mounting Foot for ERM 2501 x Positive Input Ventilation System - Wall Mounted Unit c/w Heater1 x GB-WK 250 Wall Bracket For Giga Box Fans - 250mm - 355mm1 x CBM 9/7 4 Pole 373watt VR (Open Motor)1 x Ancillary Pack for SB-Biflow 315 model1 x CBA-130 Inlet Flange for CBT-1301 x FSAF500FTX 500 mounting feet (Pair)1 x Spiral Duct Grille Termination - 250mm1 x Elta SCP560/4-3AC - IP551 x Elta SCP250-1EC - IP551 x DA12/9 Feet1 x Ancillary Pack for SDA350/4-1EC1 x Ancillary Pack for SLC-800 for SLC800/6A-3AC1 x Ancillary Pack for SLC-710 for 6 Pole Motors1 x MRK Mounting Bracket1 x Etaline 355mm - E2-011 x Clearflow CFHT Kitchen/High Temp Roof Fan - CFHT500/4-3AC1 x KTEX 50-30-4 Fan (ATEX)1 x Elta SCP630/4-3AC - IP551 x DA7/7 Feet1 x Ancillary Pack for SLC-900 for SLC900/4B-3AC1 x Elta Turboflow-TF - 450mm - Single phase1 x Chaysol da 9-7 - V7099331 x Ancillary Pack for SLC-900 for SLC900/6A-3AC and SLC900/6B-3AC
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...