• Model:MPS

Acoustic Commercial Kitchen Inline Exhaust Fan - MPS - (Single Phase)

£ 678.46 (excl. VAT)

£ 814.15 (inc. VAT)

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility.
Weather housings and also available making them suitable for outdoor mounting.

EC (energy efficient & with integrated speed control) versions also available, ask for details.
* Motor can be regulated using voltage reduction.
* Terminal connections for thermal contacts.
* IP 54 degree of protection for closed housing covers as well as duct connections fitted on the inlet and outlet sides.
* Models 225-E2 ~ 280-E2 supplied with 2-pole motors.
* Models 400-E4 ~ 560-E4 supplied with 4-pole motors.
* Max. medium temperature 120°C
* Motor outside of air stream
* Speed controllable
* Swing-out fan unit
* With condensate and grease drain

Mounting instructions
* Installation with upward, right-hand or left-hand exhaust socket.
* If the unit is mounted with the exhaust socket pointing to the left or the right, the service door must be altered by the customer.

Model 225-E2 has a 200mm spigot. Max Airflow 1465 m3/hr
Model 250-E2 has a 250mm spigot. Max Airflow 2491 m3/hr
Model 280-E2 has a 315mm spigot. Max Airflow 3390 m3/hr
Model 315-E2 has a 354mm spigot Max Airflow 4400 m3/hr
Model 400-E4 has a 354mm spigot. Max Airflow 4348 m3/hr
Model 450-E4 has a 354mm spigot. Max Airflow 5770 m3/hr
Model 500-E4 has a 400mm spigot. Max Airflow 7780 m3/hr
All above at free air.

PDF Files


Specification, installation and operating instructions


DIMENSIONAL SPECS

Available Options

1 x DEF-140T Inlet Guard for the CBT-100N1 x SG AW-710 BGr , RAL 90051 x SG AXC/AM/AR 800 guard grill1 x 1mtr Round Ducting - 125mm1 x Raptor SDA315/4-1AC1 x Soler & Palau TCBT/4-315/H - IP441 x 100mm - 125mm Round Reducer1 x BDS 350 RA b/d shutter1 x BDS 500/560 RA b/d shutter1 x DEF-CBM-RE-7 - Protection Guard1 x KRJ - 250 Inlet Guard1 x SG AW 910 Guard grille (GFC)1 x EX 140A-4C Mounting Kit for 125mm Duct1 x Plate Axial Wire Protection Guard - DEF-D-375mm1 x KRJ - 225 Inlet Guard1 x KRJ - 280 Inlet Guard1 x ERM 18 protection guard - SGM 18 EX1 x SG AW 1000 Guard 6 (GFC)2 x AL 315 D2 01 - High Performance Long Cased Axial Fan (3 phase)1 x Contactor Interface Station - CI91 x KRJ - 355 Inlet Guard1 x DEF-900AN1 x CBTR/2-451-4kw1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x AR Sileo 500 Cased Axial Fan Guard - SG AXC/AM/AR 5001 x 125mm Round 90 Degree Bend1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 125mm Round 45 Degree Bend1 x K 315 L Sileo Metal Tube Fan1 x KVK Slim 355 - Low profile Semi Acoustic Box Fan1 x Helios HRFD 315/21 x CBT-130N Centrifugal ATEX II 2G Exd IIB T41 x Raptor SDA250/4-1AC1 x CBA-130 Inlet Flange for CBT-1301 x MUB 016 200EC - Acoustic EC Box Fan1 x Ducting 45 Degree Bend - 125mm1 x Acoustic Box Fans (Inline) - CAB-1251 x Traditional T-Series Wall Fan - TX12WL1 x COM-31 x Elta 3 Amp Electronic single phase speed controller.1 x CBT-130N Centrifugal1 x Soler & Palau TCBB/4-315/H - IP441 x WOODS 31JM/16/4/5/34-DEG 4POLE 1PH LONG CASED AXIAL FAN1 x Ancillary Pack for SLC-710 for 4 pole Motors1 x CTVB/4-200 Kitchen/High Temp Roof Fan1 x Speed Controller - REB11 x EBM Papst - D2E133-DM27-D81 x Anti Vibration Duct Suspension Rings - 125mm1 x Elta Variable Speed Drive IP66 - 7.5KW1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Jetflow-HIT Metal inline - 150mm1 x CRHT/4-400 N Roof mounted Fan - Horizontal discharge1 x CRHT/4-500 N Roof mounted Fan - Horizontal discharge1 x CRHT/4-355 N Roof mounted Fan - Horizontal discharge1 x DHS 500DV roof fan1 x CTVB/4-225 Kitchen/High Temp Roof Fan1 x JETLINE-200 - In Line Centrifugal Duct Fan1 x DVS 450EV Centrifugal roof fan, vertical discharge1 x Elta SPA450/4-1AC - IP54
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 119.00

I've had 2 of these fans for 4 years now, and they are great...