• Model:MPS

Acoustic Commercial Kitchen Inline Exhaust Fan - MPS - (Single Phase)

£ 678.46 (excl. VAT)

£ 814.15 (inc. VAT)

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility.
Weather housings and also available making them suitable for outdoor mounting.

EC (energy efficient & with integrated speed control) versions also available, ask for details.
* Motor can be regulated using voltage reduction.
* Terminal connections for thermal contacts.
* IP 54 degree of protection for closed housing covers as well as duct connections fitted on the inlet and outlet sides.
* Models 225-E2 ~ 280-E2 supplied with 2-pole motors.
* Models 400-E4 ~ 560-E4 supplied with 4-pole motors.
* Max. medium temperature 120°C
* Motor outside of air stream
* Speed controllable
* Swing-out fan unit
* With condensate and grease drain

Mounting instructions
* Installation with upward, right-hand or left-hand exhaust socket.
* If the unit is mounted with the exhaust socket pointing to the left or the right, the service door must be altered by the customer.

Model 225-E2 has a 200mm spigot. Max Airflow 1465 m3/hr
Model 250-E2 has a 250mm spigot. Max Airflow 2491 m3/hr
Model 280-E2 has a 315mm spigot. Max Airflow 3390 m3/hr
Model 315-E2 has a 354mm spigot Max Airflow 4400 m3/hr
Model 400-E4 has a 354mm spigot. Max Airflow 4348 m3/hr
Model 450-E4 has a 354mm spigot. Max Airflow 5770 m3/hr
Model 500-E4 has a 400mm spigot. Max Airflow 7780 m3/hr
All above at free air.

PDF Files


Specification, installation and operating instructions


DIMENSIONAL SPECS

Available Options

1 x Elta SPA400/4-1AC - IP541 x 1mtr Round Ducting - 150mm1 x 204x60mm x 1000mm Long Hi-Flow Duct Silencer1 x Soler & Palau TCBB/4-450/H - IP651 x Female Ducting Connector - 560mm1 x 100mm Wall Duct - 350mm1 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x Ducting T Piece Equal - 355mm1 x Etamaster EM 200 EC 01 inline mix-vent fan1 x Elta SLC710/4A-3AC - IP551 x Ducting 45 Degree Bend - 355mm1 x 204x60mm Flat Channel Connector1 x Spiral end cap - 355mm1 x Spiral Duct Grille Termination - 355mm1 x 220x90mm 90 Degree Vertical Bend1 x Speed Controller - REB31 x 204x60mm Elbow Bend with 100mm Fixed Spigot1 x FRQ5-10A Inverter Speed controller1 x Elta SCP500-1EC - IP551 x Three Phase Transformer controllers - RMT 2.5 Amp1 x Three Phase Transformer controllers - RMT 5.0 Amp1 x EuroSeries (ESP) - Plate Mounted Axial Fans 400-141 x Etaline 315mm - E2 03 (Low Power Version)1 x Elta Variable Speed Drive IP66 - 4.0KW1 x Elta Variable Speed Drive IP66 - 5.5KW1 x CC-710-2.2kw1 x Transformer (silent) speed controller - RE 7.0 Amp1 x Male Ducting Connector - 80mm1 x Etaline 355mm - E2-011 x MV-Silent 250 Bathroom Extractor Fan Kit - Timer1 x HCFT/4-400mm plastic impeller plate fan1 x Soler & Palau TCBB/6-710/L - IP651 x MV-Silent 250 Bathroom Extractor Fan Kit - Standard - No Timer1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Male Ducting Connector - 630mm1 x Belt Drive Cased Axial Fan - 710mm - H version1 x Ducting 90 Degree Bend - 300mm1 x Helios HQW-560/4 - IP551 x AW Sileo EC Plate Axial Fan - Three Phase - 560mm
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...