• Model:MPS

Acoustic Commercial Kitchen Inline Exhaust Fan - MPS - (Single Phase)

£ 678.46 (excl. VAT)

£ 814.15 (inc. VAT)

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility.
Weather housings and also available making them suitable for outdoor mounting.

EC (energy efficient & with integrated speed control) versions also available, ask for details.
* Motor can be regulated using voltage reduction.
* Terminal connections for thermal contacts.
* IP 54 degree of protection for closed housing covers as well as duct connections fitted on the inlet and outlet sides.
* Models 225-E2 ~ 280-E2 supplied with 2-pole motors.
* Models 400-E4 ~ 560-E4 supplied with 4-pole motors.
* Max. medium temperature 120°C
* Motor outside of air stream
* Speed controllable
* Swing-out fan unit
* With condensate and grease drain

Mounting instructions
* Installation with upward, right-hand or left-hand exhaust socket.
* If the unit is mounted with the exhaust socket pointing to the left or the right, the service door must be altered by the customer.

Model 225-E2 has a 200mm spigot. Max Airflow 1465 m3/hr
Model 250-E2 has a 250mm spigot. Max Airflow 2491 m3/hr
Model 280-E2 has a 315mm spigot. Max Airflow 3390 m3/hr
Model 315-E2 has a 354mm spigot Max Airflow 4400 m3/hr
Model 400-E4 has a 354mm spigot. Max Airflow 4348 m3/hr
Model 450-E4 has a 354mm spigot. Max Airflow 5770 m3/hr
Model 500-E4 has a 400mm spigot. Max Airflow 7780 m3/hr
All above at free air.

PDF Files


Specification, installation and operating instructions


DIMENSIONAL SPECS

Available Options

1 x 1mtr Insulated Round Ducting - 125mm1 x TD4000 Mixvent - 355mm1 x Raptor SDA560/4-1AC1 x Female Ducting Connector - 250mm1 x Acopel F400-630/1601 x Spiral Rapid Lock Clamp - 250mm1 x Duct Suspension Rings - 250mm1 x Purlin Box 200/250 for RAW Cowls1 x Duct Termination with Mesh - 250mm1 x Spiral Duct Grille Termination - 250mm1 x Duct Quick Suspension Rings with Clasp - 250mm1 x 100mm Round Equal T Piece1 x Ancillary Pack for SB-Biflow 315 model1 x Curved boot - 250mm1 x Elta SLC560-1EC -IE5 Motor- IP551 x Ancillary Pack for SB-Biflow 400 model1 x Ducting 90 Degree Bend - 560mm1 x Raptor SDA560/46-3AC1 x Helios GigaBox 500mm GBD 500/4/4 centrifugal1 x Flanged Spigot - 250mm1 x Female Ducting Connector - 80mm1 x Belt Drive Cased Axial Fan - 800mm - G version1 x Ducting 90 Degree Bend - 250mm1 x Ancillary Sealing Band - 250mm1 x CSB-60 Centrifugal fan1 x SDD-U Anti Vibration Pads1 x Ducting 45 Degree Bend - 250mm1 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C1 x 125mm Round Condensation Trap1 x RVK-EX 315D4 (ATEX) - 315mm Atex Rated Centrifugal Fan1 x Male Ducting Connector - 250mm1 x AKOR GD - Spare Motor1 x CVAT/4-4000/400 ND 0.37Kw (230/400V50HZ) EXDIIBHT4 - ATEX RATED CABINET FAN1 x Anti Vibration Duct Suspension Rings - 80mm1 x Ducting T Piece Equal - 400mm1 x Ducting 90 Degree Bend - 80mm1 x DKEX 355-6 Centrifugal High Performance ATEX Fan1 x Male Ducting Connector - 80mm1 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x F7/G4 filter kit for IDEO HR unit
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...