• Model:MPS

Acoustic Commercial Kitchen Inline Exhaust Fan - MPS - (Single Phase)

£ 678.46 (excl. VAT)

£ 814.15 (inc. VAT)

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility.
Weather housings and also available making them suitable for outdoor mounting.

EC (energy efficient & with integrated speed control) versions also available, ask for details.
* Motor can be regulated using voltage reduction.
* Terminal connections for thermal contacts.
* IP 54 degree of protection for closed housing covers as well as duct connections fitted on the inlet and outlet sides.
* Models 225-E2 ~ 280-E2 supplied with 2-pole motors.
* Models 400-E4 ~ 560-E4 supplied with 4-pole motors.
* Max. medium temperature 120°C
* Motor outside of air stream
* Speed controllable
* Swing-out fan unit
* With condensate and grease drain

Mounting instructions
* Installation with upward, right-hand or left-hand exhaust socket.
* If the unit is mounted with the exhaust socket pointing to the left or the right, the service door must be altered by the customer.

Model 225-E2 has a 200mm spigot. Max Airflow 1465 m3/hr
Model 250-E2 has a 250mm spigot. Max Airflow 2491 m3/hr
Model 280-E2 has a 315mm spigot. Max Airflow 3390 m3/hr
Model 315-E2 has a 354mm spigot Max Airflow 4400 m3/hr
Model 400-E4 has a 354mm spigot. Max Airflow 4348 m3/hr
Model 450-E4 has a 354mm spigot. Max Airflow 5770 m3/hr
Model 500-E4 has a 400mm spigot. Max Airflow 7780 m3/hr
All above at free air.

PDF Files


Specification, installation and operating instructions


DIMENSIONAL SPECS

Available Options

1 x Soler & Palau - HCBB/2-355/H - IP651 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting2 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x 220x90mm x 1m Insulated Rectangular Duct1 x Helios HQW-250/4 - IP551 x HCFB/4-355mm plastic impeller plate fan3 x 125mm Insulated 90 Degree Bend1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x SILENTUB 100/120 Mounting Feet1 x Traditional T-Series Window Fan - TX7WW1 x Vortice Vario 150 Window/Wall Fan - AR-LL-S1 x Raptor SDA560/46-3AC1 x Insulated extract Plenum 8+11 x Spiral end cap - 250mm1 x KABT High Temp Acoustic Kitchen Fan & Inverter Kit - KABT/4-12000/560 ND - Pack 52 x 204x60mm Insulated Rectangular Horizontal 90° Bend2 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x Helios HQW-355/4 - IP551 x Metal Inline Fan - VENT-400K - T (3 Phase)1 x Flanged Spigot - 150mm1 x Soler & Palau - HXBR/4-250/H - IP441 x Soler & Palau HXM-250mm1 x Soler & Palau - HCBB/6-355/H - IP651 x 204x60mm 45 Degree Vertical Bend2 x 2mtr Insulated Round Ducting - 125mm1 x Elta SPA250/4-1AC - IP441 x 220x90mm to 160mm straight adapter1 x Elta SCP250/4-1AC - IP551 x Helios - HQD 250/21 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x HRT/4-350-BPN E211 x 1mtr Round Ducting - 125mm1 x Thermostat - Adjustable Room Thermostat - 230V1 x Carriage1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Soler & Palau - HCBT/4-355/H - IP651 x Soler & Palau - HXBR/4-450/H - IP541 x Soler & Palau - HXBR/4-355/H - IP541 x Soler & Palau - HCBT/2-250/H - IP651 x 204x60mm x 1m Insulated Rectangular Duct1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 204x60mm to 125mm Insulated Straight Adapter1 x Duct Mounted Filter Box - G4 Grade Panel - 200mm1 x 220x90mm Elbow Plenum with 160mm Spigot1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 220x90mm Insulated Rectangular T-Piece1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x *VORT HRW 30 MONO Evo - Single Room Heat Recovery Unit,1 x Soler & Palau - HXBR-250 ECOWATT - IP441 x Ducting T Piece Equal - 250mm1 x Elta Wall Cowl SWC25/31
Reviews
Airvent Ceiling Sweep Fan - 36 inch - 444122
Airvent Ceiling Sweep Fan - 36 inch - 444122
£ 59.84

Fitted 2 Of These Excellent Fans in a Community Club to shif...