• Model:MPS

Acoustic Commercial Kitchen Inline Exhaust Fan - MPS - (Single Phase)

£ 678.46 (excl. VAT)

£ 814.15 (inc. VAT)

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility.
Weather housings and also available making them suitable for outdoor mounting.

EC (energy efficient & with integrated speed control) versions also available, ask for details.
* Motor can be regulated using voltage reduction.
* Terminal connections for thermal contacts.
* IP 54 degree of protection for closed housing covers as well as duct connections fitted on the inlet and outlet sides.
* Models 225-E2 ~ 280-E2 supplied with 2-pole motors.
* Models 400-E4 ~ 560-E4 supplied with 4-pole motors.
* Max. medium temperature 120°C
* Motor outside of air stream
* Speed controllable
* Swing-out fan unit
* With condensate and grease drain

Mounting instructions
* Installation with upward, right-hand or left-hand exhaust socket.
* If the unit is mounted with the exhaust socket pointing to the left or the right, the service door must be altered by the customer.

Model 225-E2 has a 200mm spigot. Max Airflow 1465 m3/hr
Model 250-E2 has a 250mm spigot. Max Airflow 2491 m3/hr
Model 280-E2 has a 315mm spigot. Max Airflow 3390 m3/hr
Model 315-E2 has a 354mm spigot Max Airflow 4400 m3/hr
Model 400-E4 has a 354mm spigot. Max Airflow 4348 m3/hr
Model 450-E4 has a 354mm spigot. Max Airflow 5770 m3/hr
Model 500-E4 has a 400mm spigot. Max Airflow 7780 m3/hr
All above at free air.

PDF Files


Specification, installation and operating instructions


DIMENSIONAL SPECS

Available Options

1 x CRHB/6- 315mm Roof mounted Fan - Horizontal discharge1 x Elta SLC450/4-3AC - IP551 x Slotted channel1 x Duct Fast Clamps - 200mm1 x Ducting Y Piece - 150mm2 x Spiral Duct Grille Termination - 150mm2 x 220x90mm x 1m Insulated Rectangular Duct1 x Female Ducting Connector - 450mm1 x Shoed T Piece Un-Equal -450mm-315mm1 x Ducting 45 Degree Bend - 200mm1 x Spiral Duct Grille Termination - 450mm1 x Soler & Palau VFD-M inverter 10 amp IP542 x Ducting 15 Degree Bend - 150mm1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x 220x90mm Elbow Plenum with 160mm Spigot1 x Two Speed Switch - REGUL-21 x Duct Suspension Rings - 450mm1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x DEF-800AN1 x 220x90mm Insulated Rectangular Horizontal 45° Bend1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x Duct Suspension Rings - 150mm1 x Spiral end cap - 150mm1 x Male Ducting Connector - 150mm1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x Duct Termination with Mesh - 450mm2 x Ducting 90 Degree Bend - 450mm1 x FAST-TRACK RANGE 75mm - Semi-Rigid Duct 50M1 x Soler & Palau - HCBT/4-800/H-B FLOW ( Supply Air Fan) - IP551 x 1mtr Round Ducting - 125mm1 x Curved boot - 150mm1 x Anti Vibration Duct Suspension Rings - 150mm1 x Soler & Palau - HCBT/4-800/L-AX - IP551 x Duct Termination with Mesh - 150mm1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-1000-B 5.5kw1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 125mm Round 90 Degree Bend1 x Spiral Ducting 3 Meters - 450mm1 x MEV 160 & 300 Additional Spigots1 x Duct Quick Suspension Rings with Clasp - 200mm1 x DHS 500DV roof fan1 x 1mtr Round Ducting - 100mm1 x DHS 225EZ roof fan1 x CRVT/4-500 N Roof mounted Fan - vertical discharge1 x Flexible PVC Ducting - 15 Mtr1 x Spiral end cap - 450mm1 x Axial Roof mounted Extract/Supply Fan- -HCTT/4-900-B 5.5kw1 x CTVB/4-200 Kitchen/High Temp Roof Fan
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 125.99

Unbelievable! With TDmixvent500: noise reduction minimum 50%...