• Model:MPS

Acoustic Commercial Kitchen Inline Exhaust Fan - MPS - (Single Phase)

£ 678.46 (excl. VAT)

£ 814.15 (inc. VAT)

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility.
Weather housings and also available making them suitable for outdoor mounting.

EC (energy efficient & with integrated speed control) versions also available, ask for details.
* Motor can be regulated using voltage reduction.
* Terminal connections for thermal contacts.
* IP 54 degree of protection for closed housing covers as well as duct connections fitted on the inlet and outlet sides.
* Models 225-E2 ~ 280-E2 supplied with 2-pole motors.
* Models 400-E4 ~ 560-E4 supplied with 4-pole motors.
* Max. medium temperature 120°C
* Motor outside of air stream
* Speed controllable
* Swing-out fan unit
* With condensate and grease drain

Mounting instructions
* Installation with upward, right-hand or left-hand exhaust socket.
* If the unit is mounted with the exhaust socket pointing to the left or the right, the service door must be altered by the customer.

Model 225-E2 has a 200mm spigot. Max Airflow 1465 m3/hr
Model 250-E2 has a 250mm spigot. Max Airflow 2491 m3/hr
Model 280-E2 has a 315mm spigot. Max Airflow 3390 m3/hr
Model 315-E2 has a 354mm spigot Max Airflow 4400 m3/hr
Model 400-E4 has a 354mm spigot. Max Airflow 4348 m3/hr
Model 450-E4 has a 354mm spigot. Max Airflow 5770 m3/hr
Model 500-E4 has a 400mm spigot. Max Airflow 7780 m3/hr
All above at free air.

PDF Files


Specification, installation and operating instructions


DIMENSIONAL SPECS

Available Options

1 x HV Wall Mounted Belt Drive Fan 800mm 220V to 240V / 50Hz 0.75kW - Single Phase1 x Flexible PVC Ducting - 220x901 x Spiral Ducting 1 meter - 200mm1 x Spigot plate - 450mm1 x HV Wall Mounted Belt Drive Fan 800mm 400V / 50Hz 0.75kW - Three Phase1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Ducting 90 Degree Bend - 450mm1 x Heat Resistant In-line Axial Fan - VOK 135/120 H1 x WS - Reversing Switch from Helios Fans1 x Helios GigaBox 560mm GBD 560/4/4 T120 centrifugal1 x Shoed T Piece Un-Equal -450mm-315mm1 x Elta SLC500/4B-1AC - IP551 x Hydor HPA400/6-1A1 x Female Ducting Connector - 100mm1 x Female Ducting Connector - 250mm1 x AEL - Outlet Flexible Connection for TLZ450 R1 x Casals Circular Outlet Connection Flange - 5102018031 x Anti Vibration Duct Suspension Rings - 100mm1 x Spiral Duct Grille Termination - 100mm1 x Male Ducting Connector - 100mm1 x MD - Motor Protection Switch (3 Phase)1 x Purlin Box 200/250 for RAW Cowls1 x REV-3POL ATEX 11kW-25A ON/OFF1 x 100mm Round Connector with Damper1 x 5-Speed Controller for use with Elta SAX Classic Fans1 x Ducting T Piece Equal - 100mm1 x KRJ - 225 Inlet Guard1 x 110 x 54mm Rectangular Wall Plate1 x Ancillary Pack for SDA350/4-1EC1 x Impeller Side Guard - 710mm1 x Soler & Palau - HCBT/4-1000/H-X - IP551 x 110 x 54mm Elbow Bend Female1 x Rosenberg DQ 1000-8 plate axial fan1 x Soler & Palau - HCBT/6-1000/H - IP551 x 110 x 54mm Flat Channel Connector1 x Helios HQW-250/4 - IP551 x EM 200-E2M 01- Etamaster-2001 x 110 x 54mm Horizontal 45 Degree Bend1 x 110 x 54mm Low Profile Plastic Ducting - 1 Meter
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...