• Model:MPS-225-D2

Acoustic Commercial Kitchen Inline Exhaust Fan - MPS (Three Phase) - 200mm

£ 692.44 (excl. VAT)

£ 830.93 (inc. VAT)

Range of German made kitchen exhaust fans with motor out of airstream and grease drainage facility.
200mm Spigot.
Flow Rate: 1960 m3/hr

Weather housings and also available making them suitable for outdoor mounting.

EC (energy efficient & with integrated speed control) versions also available, ask for details.
* Motor can be regulated using voltage reduction.
* Terminal connections for thermal contacts.
* IP 54 degree of protection for closed housing covers as well as duct connections fitted on the inlet and outlet sides.
* Models 225-D2 ~ 315-D2 supplied with 2-pole motors.
* Models 315-D4 ~ 560-D4 supplied with 4-pole motors.
* Max. medium temperature 120°C
* Motor outside of air stream
* Speed controllable
* Swing-out fan unit
* With condensate and grease drain

Mounting instructions
* Installation with upward, right-hand or left-hand exhaust socket.
* If the unit is mounted with the exhaust socket pointing to the left or the right, the service door must be altered by the customer.

Model 225-D2 has a 200mm spigot. Max Airflow 1960 m3/hr
Model 250-D2 has a 250mm spigot. Max Airflow 2730 m3/hr
Model 280-D2 has a 315mm spigot. Max Airflow 3350 m3/hr
Model 315-D2 has a 354mm spigot Max Airflow 4520 m3/hr
Model 315-D4 has a 354mm spigot Max Airflow 3580 m3/hr
Model 355-D4 has a 354mm spigot Max Airflow 4350 m3/hr
Model 450-D4 has a 354mm spigot. Max Airflow 6660 m3/hr
Model 500-D4 has a 400mm spigot. Max Airflow 7890 m3/hr
Model 560-D4 has a 500mm spigot. Max Airflow 11840 m3/hr
All above at free air.

Link to the manufacturers website with extra information HERE

Available Options

1 x 204x60mm Flat Channel Clip (Pack of 5)1 x DV-ROF-V-315 Roof mounted unit1 x DA 18/18 Feet1 x GB-WK Wall Bracket For Giga Box Fans - 400-630mm1 x 204x60mm Elbow Bend with 150mm Fixed Spigot1 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x 204x60mm 45 Degree Vertical Bend1 x Flexible PVC Ducting - 204x601 x 204x60mm x 1m Low Profile Plastic Ducting - 1 Meter1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x 204x60mm x 1000mm Long Hi-Flow Duct Silencer1 x Fresh Air control carbon filter - 125mm1 x Capacitor 20uf for use with the EBM D2E range1 x 204x60mm Equal T Piece1 x 204x60mm 90 Degree Vertical Bend1 x Capacitor 4uf for use with the EBM A2E range1 x Connection Lead for Td ecowatt & PIR sensor1 x Economy Airvent 150mm Fan1 x 18M - 80mm PVC flexible ducting1 x 204x60mm Elbow Bend with 125mm Fixed Spigot1 x 204x60mm Rectangular to 125mm Round Adaptor1 x 204x60mm 90 Degree Horizontal Bend1 x EnergiSava 210 Low Energy Heat Recovery Unit1 x Etaline 200mm E2M 01 3-Speed1 x Helios HQW-250/2 - IP551 x Ducting T Piece Equal - 200mm1 x HCFT/6-800-H plastic impeller plate fan1 x Helios HQW-250/4 - IP551 x Ducting 90 Degree Bend - 300mm1 x CBMT/Q 315-30 1 HEATER KIT1 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x AL 315 Mounting Feet (Pair)1 x ERR 31/1 Centrifugal inline fan1 x DA7/9 Feet1 x CAB-315 ECOWATT Energy Efficient Acoustic Box Fan1 x AW Sileo EC Plate Axial Fan - Three Phase - 1000mm1 x Temperature Fan Speed Controller - ATCP4-FLS1 x HEATER BATTERY+CONTROLS 315 DIA 1 PHASE 4/8kW1 x Blast Gate (Manual) 250mm1 x Elta Unpodded Silencer 1D-560mm1 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX400/2-3 Three Phase
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Unbelievable! With TDmixvent500: noise reduction minimum 50%...