• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 892.50 (excl. VAT)

£ 1,071.00 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

1 x AW Sileo EC Plate Axial Fan - Three Phase - 1000mm1 x QP315C Acoustic Fan - 315mm1 x Vent Axia T-Series Wall Model TX9WL1 x SG AW 1000 Guard 6-Pole1 x Synthetic Air Filter Media - 15mm x 1000mm x 1000mm1 x Soler & Palau - HCBT/6-1000/H - IP551 x Electronic extractor fan speed controller - FSC 1.51 x Soler & Palau - HCFT/4-1000/H-X - IP551 x HV Wall Mounted Belt Drive Fan 1000mm 400V / 50Hz 0.75kW - Three Phase1 x BDS 300/315 RA b/d shutter1 x Soler & Palau - HCFT/4-1000/L-X - IP551 x Soler & Palau VFD-T inverter 5 amp IP541 x Female Ducting Connector - 150mm1 x IR24-P - Presence detector1 x Metallic Kitchen Extractor - CK35N1 x HCFT/6-1000-HX plastic impeller plate fan1 x AIRVENT speed control - AIR4019611 x Spigot plate - 315mm1 x Backdraught Shutters 039-SFSV-63/711 x MTP 10, 10K, Speed control1 x Duct Quick Suspension Rings with Clasp - 315mm1 x Commercial Thermostat - TH161 x Three Phase Transformer controllers - RMT 1.5 Amp1 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x Envirovent Silent MV160/100S Mixvent - 100mm - (5 year warranty)1 x BDS 400/450 RA b/d shutter2 x Differential Pressure Switch - 20 - 300 Pa - IP651 x Spiral Ducting 1 meter - 315mm1 x Ducting Reducers Short - 315mm-200mm1 x CBT-130N Centrifugal ATEX II 3D ExtD 125*C1 x BDS 350 RA b/d shutter1 x Duct Termination with Mesh - 315mm1 x JCA 560 - Back Draft Shutter for CRHB/CRHT Roof Fans1 x Spiral end cap - 315mm1 x HV Wall Mounted Belt Drive Fan 800mm 220V to 240V / 50Hz 0.75kW - Single Phase1 x Ducting Y Piece - 315mm1 x HV Wall Mounted Belt Drive Fan 1500mm 400V / 50Hz 1.5kW - Three Phase1 x Ancillary Sealing Band - 200mm1 x Ducting 90 Degree Bend - 560mm1 x CVAT/4-4000/400 ND 0.37Kw (230/400V50HZ) EXDIIBHT4 - ATEX RATED CABINET FAN1 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x Duct Suspension Rings - 315mm1 x Spiral Ducting 3 Meters - 355mm1 x DKEX 315-4 Centrifugal High Performance ATEX Fan1 x Ducting T Piece Equal - 315mm1 x Transformer Speed Control - RTRE- 7.0Amp1 x Ducting Reducers Long - 300mm-250mm1 x Spigot plate - 100mm1 x Plastic Kitchen Extractors - CK-60F1 x SCHT-AD Intelligent elements for demand controlled ventilation1 x Etaline Max-Fan - 315mm - E2 011 x Ducting 90 Degree Bend - 710mm1 x Speed Controller - REB11 x KVK Silent 355 Centrifugal circular duct fan1 x Manrose Humidistat - 13611 x Atex Inline Fan 180mm - ERM18EXE1 x Duct Fast Clamps - 315mm1 x RUCK MTP 20, 10K, Speed control1 x Soler & Palau - HCBT/4-250/H - IP651 x Elta SLC630/4B-3AC - IP551 x EC-Basic-T temperature1 x TG-R room temperature sensor
Reviews
TD-SILENT 350/125
TD-SILENT 350/125
£ 170.17

Excellent low noise fan, I've got one unit running years and...