• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 937.13 (excl. VAT)

£ 1,124.56 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

2 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan2 x Transformer 5 Speed Controller - ATC1-4TK1 x Transformer (silent) speed controller - RE 3.0 Amp2 x RDH FLEX-SQUARE - ADH/RDH 04501 x Multiflow SMB550/4-1AC1 x REB-CVF 0-10v Controller4 x PIR Sensor - PIR21 x QPTW 250C Acoustic Twin Fan with Controller1 x UB47- Universal Insulated Terminal3 x PIR Sensor - PIR42 x AIRVENT speed control - AIR4019611 x Silentub - STUB 1001 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan1 x Remote controller FLEX - for VEKO INT3 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x Helios TSW 7.5 Amp Transformer speed controller1 x Helios TSW 3 Amp Transformer speed controller2 x Speed Controller - REB52 x MTP 10, 10K, Speed control2 x REE-2 Electronic Speed Controller2 x Speed Controller - REB1-N1 x CBM 9-9 550w 4P VR (Open Motor)2 x MTS10- extractor fan 3 step switch1 x Speed Controller - REB11 x CFI In-line 425 - Carbon Filter1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x ACO8AC/EC AutoChangeover panel2 x EBM-Papst D3G133-BF05-14 Double inlet1 x Duct Termination with Mesh - 150mm2 x VEKA INT 2000/15.0-L1 EKO2 x Transformer 5 Speed Controller - ATC1-10TK1 x Transformer (silent) speed controller - RE 1.5 Amp1 x Transformer Speed Control - RTRE- 7.0Amp1 x SPI-100 C Iris damper1 x Transformer Speed Control - RTRE- 1.5Amp1 x DEF-CBM-RE-7 - Protection Guard1 x CBT-100N Centrifugal2 x DDMP 09/09 Mounting Flange2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR1 x Transformer Speed Control - RTRE- 5.0Amp2 x CBB-60N Centrifugal2 x 7 Day Programmable TIMECLOCK1 x EFSC-3N- Single Phase Speed Control2 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)3 x RUCK MTP 20, 10K, Speed control2 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x Speed controller with Reverse - REB-1R1 x Vent Axia ACM 150 inline mixed flow duct fan1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Vent Axia ACM 125 inline mixed flow duct fan2 x Helios TSW 1.5 Amp Transformer speed controller1 x MWS 3 – Transformer Controller With Motor Protection2 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan1 x Helios HQW-630/4 - IP551 x ERR 20/1 Centrifugal inline fan1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Remote Timer Control - 13512 x Vent Axia Silent 100T (TIMER)1 x TD Mixvent 800/200 EEXEIIT32 x Elta Variable Speed Drive IP66 - 4.0KW1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x 204x60mm Insulated Rectangular Vertical 45° Bend2 x EBM-Papst D4E225-BC01-17 Double inlet1 x AXC TP - 150mm Plastic Centrifugal Inline Fan1 x RD35S-4DW.6W.3L - 122297 (Three Phase)1 x Contactor Interface Station - CI91 x CO2 Room Sensor - CO2-R1 x CMT-2 120/50 - 0,09Kw - LG270 Single inlet centrifugal fan direct driven1 x CSB-60 Centrifugal fan1 x Comefri - TLZ 450 R - High Performance Scroll Fan1 x 100mm Round Connector with Damper1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x DPD 12PM Delivery Surcharge1 x Duct Termination with Mesh - 250mm1 x CMT-2 180/75 0.75KW - Single inlet centrifugal fan with inlet and outlet flange connections - 200mm1 x TecFire Intumescent Damper - Rectangular 400x400mm1 x ADH E0-450 Flange - 0450 ADHE/RDHE2 x Biflow SB500-CON2-3 - High Temperature Bifurcated Fan1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Speed Controller - REB101 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)2 x TG-K3/NTC10-01 - Duct temperature sensor2 x TEM 075 - 5 Speed Transformer Speed Control2 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x Speed Controller - REB31 x SD-MUB Vibration pad set3 x VTR 500 STD Filter Kit2 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x KBA- Inlet Mounting 2251 x DDMP 07/07 Mounting Flange1 x CBT-80N Centrifugal2 x SDD-U Anti Vibration Pads1 x CBM Low Pressure Centrifugal Fan - CBM 7/7 6 Pole 72watt CVR2 x EHB 160 1.0kw - Helios Electric Heater Battery with Control and Sensor.1 x Backdraught Shutters 039-SFSV-63/712 x CBM 7/7 147w 4P RE-VR2 x 125mm Round Connector with Damper2 x Flat Roof Terminal -OFT 5 - EPDM1 x Twinflow STDL315-1EC1 x Potentiometer EGH 01 - for DDMP Fans1 x DA9/9-NT1 x Skyflow SSR Horizontal Roof Cowl SSR80B1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x Slimline 150 High Efficiency, Low Profile Heat Recovery Unit1 x Universal Pipe Fixing Clip1 x CBP-9/7-RC1 x Run On Timer - 5s - 4hrs - RT5A1 x RDH Flange - 02501 x RDH Flange - 03151 x HXP450/6-1 - 6 Pole - Single Phase2 x Elta SLC500/4B-1AC - IP551 x Flanged Damper 019-0500-STD1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x CBM 9/7 4p 420W RE-VR1 x CBM Low Pressure Centrifugal Fan - CBM 12/9 6 Pole 736watt C1 x GRA-100 External Grill by S&P1 x Nicotra RDH G2E7-04501 x Contra Rotating TCBBx2-630 Cased Axial - Single Phase - IP65 - Soler & Palau2 x VA 9/2 T - High Temp Axial Fan,3 x Side Withdrawal Casing - 1H x 1W - To suit 100 Panel and 292 HEPA1 x CAD-COMPACT 500 ADVANCED N8 - MVHR unit1 x Spiral end cap - 80mm1 x Flanged Damper 019-0560-STD1 x DDMP 09-09 1F 1000W M6A1 DA51 x Electrostatic Precipitator - 1H x 3W1 x Chaysol DA 9/9 3 speed1 x Elta SCP315/4-1AC - IP551 x FAST-TRACK RANGE 75mm - Seal Ring (1 bag of 10)1 x MV-Silent 350 Bathroom Extractor Fan Kit - Timer1 x Soaker Sheet to suit RA8001 x Vent Axia W300310 Controller Electronic 1.5A1 x Ancillary Pack for SLC-4001 x Purlin Box 800 for RAW Cowls1 x Stainless steel Mesh Grease Filter - 600x600x50 NON STD1 x CBT-130N Centrifugal1 x Elta SLC560/4C-3AC - IP551 x RF-100 G4 Grade Filter for S&P MVHR units1 x RF-100 F7 Grade Filter for S&P MVHR units1 x Ancillary Pack for SB-Biflow 250 model1 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x Helios TSW MCB Amp Transformer speed controller2 x Isolator Switch - ISOSW1 x Silent 100 Window Kit - windowS1 x Mini Diffuser - 100mm1 x Speed Controller - REB2.5-N1 x Silentub - STUB 2001 x MEV Spider Additional Spigots1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x Transformer 5 Speed Controller - ATC1-2TK1 x Capacitor 2uf for use with the EBM A4E range1 x Push Timer Switch - ZA41 x RDS 11 Helios Transformer Controller With Motor Protection1 x CS2 Current Switch1 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x MWS 1.5 – Transformer Controller With Motor Protection1 x CBS-60 Outlet Flange for CSB/CBT-601 x WS - Reversing Switch from Helios Fans
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 505.88

Delivered super promptly yesterday, next day. Only just fitt...