• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 937.13 (excl. VAT)

£ 1,124.56 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

2 x Transformer (silent) speed controller - RE 1.5 Amp1 x EC6H - Reversible Group Fan Electronic Controller2 x REB-CVF 0-10v Controller2 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Airvent ceiling fan controller1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5002 x Helios HQW-200/4 - IP552 x TG-K3/NTC10-01 - Duct temperature sensor2 x Multiflow SMB550/4-1AC2 x Elta Variable Speed Drive IP66 - 0.75KW1 x Electronic extractor fan speed controller - FSC 1.53 x MTP 10, 10K, Speed control1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Transformer (silent) speed controller - RE 3.0 Amp2 x RDH FLEX-SQUARE - ADH/RDH 04501 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x REE-1 Electronic Speed Controller1 x RDS 11 Helios Transformer Controller With Motor Protection1 x MEV Spider Wireless boost Switch - MEV-SWH-W2 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x SG-200 Fan Guard for the HQW 2001 x Isolator Switch - EFF-ISO1 x TUNE-R-200-3-M1 - Control Damper1 x Vent Axia ACM 200 inline mixed flow duct fan1 x Vent Axia T-Series Controller2 x Speed Controller - REB12 x Transformer Speed Control - RTRE- 12.0Amp1 x Speed Controller - REB51 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Helios TSW 1.5 Amp Transformer speed controller1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x SPI-100 C Iris damper1 x CBT-100N Centrifugal1 x TG-R room temperature sensor1 x Remote Timer Control - 13511 x MTS10- extractor fan 3 step switch2 x CBS-60 Outlet Flange for CSB/CBT-602 x EBM-Papst D4E225-BC01-17 Double inlet2 x CBA-60 Inlet Flange for CBT-601 x Elta Wall Cowl SWC56/631 x Silent 100 Window Kit - windowS1 x Quietflow SQS400-1ECL - Centrifugal Box Fan1 x Speed Controller - REB1-N1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x KKS 100 silencer-section - For use with the MUB 100 size Fans.
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 58.40

I have a loft mount extractor fan which was very noisy. I ...