• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 937.13 (excl. VAT)

£ 1,124.56 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

1 x ACO8AC/EC AutoChangeover panel1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x Elta ACO Panel 149-ACO14E1 x Elta 3 Amp Electronic single phase speed controller with TK1 x EC-Vent control board1 x CONTROL ECOWATT - Basic2 x Vent Axia ACM 125 inline mixed flow duct fan1 x MWS 1.5 – Transformer Controller With Motor Protection1 x WS - Reversing Switch from Helios Fans1 x EM30-24 Electro-Mechanical Control Panel1 x ACO 149-ACO1/EDV1 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE1 x TG-K Duct temperature sensor2 x Transformer 5 Speed Controller - ATC1-12TK1 x Elta ACO Panel 149-ACO18B1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x Electronic extractor fan speed controller - FSC 1.51 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x TG-K3/NTC10-01 - Duct temperature sensor1 x Helios HQW-200/4 - IP551 x Systemair Save Connect 2.0 Internet Module1 x EC-Vent Room Unit2 x Transformer (silent) speed controller - RE 3.0 Amp1 x Vent Axia Silent 100T (TIMER)1 x QPTW 250C Acoustic Twin Fan with Controller1 x EM30-24 Control Panel Commissioning Service1 x CBS-60 Outlet Flange for CSB/CBT-601 x MTP 10, 10K, Speed control1 x TD Mixvent 800/200 EEXEIIT31 x SG-200 Fan Guard for the HQW 2001 x Helios HQW-250/4 - IP551 x Transformer (silent) speed controller - RE 1.5 Amp1 x RDH FLEX-SQUARE - ADH/RDH 04501 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan1 x EBM-Papst D4E225-BC01-17 Double inlet1 x Remote Timer Control - 13511 x CBA-60 Inlet Flange for CBT-60
BD7/7 centrifugal M4 0.13Kw
BD7/7 centrifugal M4 0.13Kw
£ 345.00 now £ 300.00
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...