• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 892.50 (excl. VAT)

£ 1,071.00 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

1 x FSAF315B2DX Silencer 355/81 x DA12/12 Feet1 x ELS-GU Flush Mounted Casing1 x DA 15/15 Feet1 x DA 18/18 Feet1 x DA9/7 Feet1 x MRK Mounting Bracket1 x FSAF500FTX 500 mounting feet (Pair)1 x FUM Mounting Foot for ERM 2501 x Melinex FSAF500B1DA Silencer 560/121 x FSAF560B2DA Silencer 620/121 x MELINEX 200mm Circular Inline Silencers -SLU-9001 x CBT-80N Centrifugal ATEX II 2G Exe II T31 x ELS Plasterboard Adaptor2 x Ducting 30 Degree Bend - 450mm1 x Soler & Palau HXM-200mm1 x Elta ACO Panel 149-ACO14E1 x DA12/9 Feet1 x MK 225 - Mounting Feet for Helios AMD Cased Fans1 x 204x60mm Flat Channel Clip (Pack of 5)1 x CBT-130N Centrifugal ATEX II 2G Exe II T31 x 1mtr Round Ducting - 150mm1 x CBT-100 N (230/400V50HZ) LG270-EXDIIBT41 x Elta Podded Silencer 1D- 710mm1 x Elta SLC500/2A-3AC - IP551 x Spiral Ducting 3 Meters - 300mm1 x 204x60mm Flat Channel Connector1 x MELINEX 250mm Circular Inline Silencers -SLU-9001 x CBT-100N Centrifugal ATEX II 2G Exe II T31 x Ducting Y Piece - 125mm1 x Synthetic Air Filter Media - 6mm x 1000mm x 1000mm1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Rosenberg ATEX DKHM 355-4SW.110.5DF-E751 x FSAF800B2DA Silencer 860/161 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x Purlin Box 200/250 for RAW Cowls1 x Synthetic Air Filter Media - 10mm x 1000mm x 1000mm1 x 150mm Round Wall Plate1 x Kitchen Grille with Grease Filter - 300x300 - NO GRILLE BOX1 x DKEX 355-6 Centrifugal High Performance ATEX Fan1 x Anti Vibration Duct Suspension Rings - 300mm1 x Elta Qube SQU Centrifugal Box Fan - SQU23/4-3HTS - Three Phase1 x Flanged Spigot - 450mm1 x K 315 L Sileo Metal Tube Fan1 x Ducting T Piece Equal - 450mm1 x 220x90mm 90 Degree Horizontal Bend1 x Elta Cased Axial Flange - 500mm1 x Synthetic Air Filter Media - 10mm x 2mtr x 10mtr Half Roll1 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)1 x Female Ducting Connector - 250mm1 x Spiral Ducting 3 Meters - 450mm1 x Ducting 45 Degree Bend - 200mm
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...