• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 937.13 (excl. VAT)

£ 1,124.56 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

1 x Run On Timer - 5s - 4hrs - RT5A2 x Helios ZNE Electronic Fan Overrun Timer2 x Push Timer Switch - ZA43 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Time Delay Unit - DT20B3 x 7 Day Programmable TIMECLOCK1 x TTC-2000 Three phase electric heater controller1 x EC-Vent control board1 x Elta ACO Panel 149-ACO14E1 x CONTROL ECOWATT - Basic1 x ACO 149-ACO1/EDV1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x EM30-24 Electro-Mechanical Control Panel1 x EC-Vent Room Unit4 x Systemair Save Connect 2.0 Internet Module1 x Elta ACO Panel 149-ACO18B1 x EM30-24 Control Panel Commissioning Service2 x Vent Axia ACM 150 inline mixed flow duct fan1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 5001 x Easy-fix termination kit - High Rise Ventilator - EFT1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 3551 x Elta Wall Cowl SWC56/631 x Elta Wall Cowl SWC45/502 x GRA-100 External Grill by S&P1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 7101 x Elta Louvre Shutter - 400mm2 x Remote Timer Control - 13512 x CPTA-S PIR SENSOR Volt Free Contacts - Surface Mounted1 x Jet Cowl - 315mm3 x Airvent ceiling fan controller4 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan4 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan3 x Helios TSW MCB Amp Transformer speed controller4 x Vent Axia ACM 100 inline mixed flow duct fan4 x Isolator Switch - ISOSW1 x Vent Axia ACM 125 inline mixed flow duct fan2 x Elta 6 Amp Electronic single phase speed controller with TK4 x Single phase speed controller by auto-transformer - RMB 1.5 Amp2 x WS - Reversing Switch from Helios Fans2 x Electronic extractor fan speed controller - FSC 1.53 x Transformer (silent) speed controller - RE 3.0 Amp4 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)2 x TG-K Duct temperature sensor3 x Elta 3 Amp Electronic single phase speed controller with TK2 x TG-R room temperature sensor1 x BEAS-control module2 x Elta Variable Speed Drive IP66 - 0.75KW4 x MTP 10, 10K, Speed control2 x Speed Controller - REB11 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3004 x PIR Sensor - PIR43 x SAVE VSR 300 heat recovery unit2 x Single phase speed controller by auto-transformer - RMB 3.5 Amp1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven2 x Transformer (silent) speed controller - RE 5.0 Amp3 x Speed Controller - REB52 x Helios HQW-315/4 - IP551 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT2 x QPTW 250C Acoustic Twin Fan with Controller2 x CS2 Current Switch1 x TG-K Duct temperature sensor4 x UB47- Universal Insulated Terminal2 x AIRVENT speed control - AIR4019611 x Potentiometer EGH 01 - for DDMP Fans1 x Single Deflection Grille 400mm with OBD damper2 x Mini Diffuser - 100mm5 x Speed Controller - REB1-N2 x Vent Axia Silent 100T (TIMER)1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x IR24-P - Presence detector4 x PIR Sensor - PIR24 x TG-K3/NTC10-01 - Duct temperature sensor1 x VTR 500 STD Filter Kit3 x Silent 100 Window Kit - windowS3 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x S&P MULTI-REG EC FAN CONTROLLER / INTERFACE2 x Vent Axia ACM 200 inline mixed flow duct fan2 x MWS 1.5 – Transformer Controller With Motor Protection2 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)3 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt CVR2 x Multiflow SMB550/4-1AC2 x CPTA-E Flush mounted PIR sensor with timer2 x Vent Axia ACM 150 T (Timer Model) inline mixed flow duct fan2 x Speed controller with Reverse - REB-1R4 x Transformer 5 Speed Controller - ATC1-4TK2 x Remote controller FLEX - for VEKO INT1 x TD EVO-100 PF ECOWATT - Environmentally Friendly Energy Efficient Inline Fan4 x MTS10- extractor fan 3 step switch2 x CBS-60 Outlet Flange for CSB/CBT-601 x Capacitor 2uf for use with the EBM A4E range2 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)2 x Speed Controller - REB2.5-N1 x DDMP 12-12 3F 1810W M6A4 DG01 x EBM-Papst D3G133-BF05-14 Double inlet2 x CBA-60 Inlet Flange for CBT-602 x MEV Spider Wireless boost Switch - MEV-SWH-W1 x Silentub - STUB 1001 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR2 x CBM 9-9 550w 4P VR (Open Motor)1 x TD160-NT Mixvent - 100mm - TD160 Timer1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5952 x REB-CVF 0-10v Controller4 x Helios HQW-630/4 - IP553 x DEF-CBM-RE-7 - Protection Guard2 x ENV 100 12v transformer SELV4 x VTR 300 STD Filter Kit1 x Contactor Interface Station - CI91 x Elta Wall Cowl SWC25/311 x Helios TSW 7.5 Amp Transformer speed controller4 x Transformer 5 Speed Controller - ATC1-2TK1 x Transformer 5 Speed Controller - ATC1-8TK1 x ERR 20/1 Centrifugal inline fan3 x Transformer Speed Control - RTRE- 1.5Amp2 x Transformer (silent) speed controller - RE 1.5 Amp2 x CBT-100N Centrifugal1 x VEKA INT 2000/15.0-L1 EKO2 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Transformer 5 Speed Controller - ATC1-10TK2 x DEF-140T Inlet Guard for the CBT-100N1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x ERR 31/1 Centrifugal inline fan2 x CBM Low Pressure Centrifugal Fan - CBM 10/10 4 Pole 550watt VR2 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven2 x FRQ5-10A Inverter Speed controller3 x Transformer Speed Control - RTRE- 7.0Amp3 x Speed Controller - REB102 x Envirovent 4 Way Remote Control Switch - SWHBKRF-42 x Temperature Fan Speed Controller - ATCP4-WMS4 x Skyflow SSR Horizontal Roof Cowl SSR31/35B2 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT2 x Envirovent G4 Filter - SL-G4/F72 x Vortice Quadro Micro 100 I - Standard Version2 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS2 x TD Mixvent 800/200 EEXEIIT31 x Skyflow SSR Horizontal Roof Cowl SSR80B2 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Elta 6 Amp Electronic single phase speed controller.2 x KKS 100 silencer-section - For use with the MUB 100 size Fans.1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Transformer Speed Control - RTRE- 5.0Amp1 x REU 7amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost2 x Helios TSW 1.5 Amp Transformer speed controller1 x Two Speed Switch - REGUL-21 x Compact SCD450/4-1AC1 x ACO8AC/EC AutoChangeover panel1 x CBA-100 Inlet Flange for CBT-1001 x LFBR 315 G4 - Helios Inline Filter Box - 315mm1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt 3V (3-Speed)1 x DDMP 10-08 3F 2210W M6A4 DG02 x Electrostatic Precipitator - 1H x 3W2 x Helios RR-250-C Centrifugal inline fan1 x Speed Controller - REB81 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt C VR1 x Helios HQW-200/4 - IP551 x CBP-18/18-RC Belt Driven Centrifugal Fans
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...