• Model:ERM18EXE

Atex Inline Fan 180mm - ERM18EXE

£ 892.50 (excl. VAT)

£ 1,071.00 (inc. VAT)

Product description
* For commercial use: Durable, powerful and robust.
* Type-examination tested according to European Directive 94/9/EC (ATEX).
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* For ventilation or air extraction, depending on the installation direction.
* Can be fitted in any position.
* Balanced safety technology available.
* 310m3/hr this version
Features
* MAICO Ex fans fulfil the safety requirements of European Directive 94/9/EC for units and protective systems in explosion-endangered areas.
* Device group II, Category 2 G
* Type of protection "e": Increased safety
* For zones 1 and 2.
* Supply of smaller air volumes only at medium resistances.
* Housing and impeller are made from high quality synthetic material, antistatic
* Semi-centrifugal impeller, favourable flow technology.
* Inflow direction equals outflow direction. Thus resulting in simple installation.
* Can be fitted in any position.

Air flow direction
* Airstream and rotational directions are indicated by arrows marked on the fan housing

Motor
* Robust motor with ball bearings, maintenance-free.
* Capacitor motors with operating capacitor ready for use in terminal box.

Mounting instructions
* Inlet and outlet side connection couplings for direct installation in ventilation ducts.
* Reducers for connecting to different duct diameters (intake or exhaust sockets); see Accessories.
* Use ELM-Ex flexible cuffs to prevent transfer of vibrations onto the duct system.
* ERM 22 E Ex e: 2 reducers to DN 200 included in scope of delivery.

Electrical connection
* Terminal box fitted to fan housing, explosion proof.

Required safety technology
* MVEx motor safety switch to monitor the maximum motor current.
* Accessories needed for ERM...E Ex e.
* Type-examination tested according to Directive 94/9 EC (ATEX).
* Installation exclusively in non-explosive areas.

Safety instructions
* No speed control allowed.
* The fan may only be operated using the rated voltage shown on the rating plate.
* The fan may be operated only if the protection against accidental contact with the impeller is guaranteed to be in accordance with DIN EN 294 for fans with free inlet and outlet. To do this, fit an SGR-Ex protective grille.
* Ensure that foreign bodies cannot fall into or be sucked into the fan.

PDF Files


ERM-18 Datasheet

1 x GB-WSD 450 Weather Protection hood for the Giga-Box Fans - 450mm1 x 204x60mm x 1000mm Long Hi-Flow Duct Silencer1 x AL 710 D4 01 - High Performance Long Cased Axial Fan1 x HCFB/4-315mm plastic impeller plate fan1 x 204x60mm x 2m Low Profile Plastic Ducting - 2 Meter1 x Male Ducting Connector - 100mm1 x 204x60mm Rectangular to 125mm Round Adaptor2 x 204x60mm 45 Degree Vertical Bend1 x RUCK MTP 30, Stepped Speed control1 x SG AXC/AM/AR 355 guard grill1 x Commercial Thermostat - TH162 x STF1 Oscillating Tower Fan1 x Jetflow-HIT Metal inline - 125mm1 x HCFB/4-450mm plastic impeller plate fan1 x Acopel F400-200/1601 x Elta Wall Cowl SWC45/501 x Impeller Side Guard - 630mm1 x Elta SCP315/4-1AC - IP551 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 650mm1 x AW 650 D6-2-EX Explosion Proof Axial Fan - ATEX1 x FlameProof Plate Axial Fan - Three Phase - 10.5 inches - Eexd IIC T4 - 4 pole1 x Three Phase ATEX Compact axial fan - 400mm - compactATEX71 x Airvent Ceiling Sweep Fan - 48 inch - 4441231 x FlameProof Plate Axial Fan - Three Phase - 10.5 inches - Eexd IIC T4 -2pole1 x FlameProof Plate Axial Fan - Single Phase - 15 inches - Eexd IIC T4 -4pole1 x Metal Inline Fan - VENT-150NK1 x Three Phase ATEX Compact axial fan - 800mm - compactATEX81 x Ducting 45 Degree Bend - 560mm1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x Spiral Ducting 1 meter - 80mm1 x Airvent Ceiling Sweep Fan - 36 inch - 4441221 x Airvent ceiling fan controller1 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -2pole1 x Jetflow-HIT Metal inline - 100mm1 x Spigot plate - 200mm1 x Anti Vibration Duct Suspension Rings - 355mm1 x Helios AV125 External Wall Fan1 x Smoke Extract Axial Fan Series AXC 315 (B)1 x Anti Vibration Duct Suspension Rings - 300mm1 x Ducting T Piece Equal - 300mm1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Mounting Feet (pair) for SB-CON 250
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...