AXCBF 800D4-18 IE2 Bifurcated Axial Fans

• Aerofoil impeller with adjustable pitch angle
• Die cast aluminium hub and blades
• Bifurcated casing, hot dip galvanized steel, to EN ISO 1461
• flangesholes according Eurovent 1/2
• Single and three phase motors, IP55, insulation class F, in accordance with EN 60034-5, IEC 85.
• Terminal box mounted directly onto the motor.
• Suitable for operating temperatures of up to 200°C

The Systemair AXCBF range of bifurcated medium pressure axial fans has been developed for applications with an atmosphere which would either require special motors or reduce the lifetime of a standard motor. The motors of AXCBF are out of the airstream. Available in sizes from 250 up to 800 mm nominal diameter. AXCBF bifurcated axial fan casings are heavy gauge, hot dip galvanized. The motor compartment allows easy access to the motor terminal box for wiring. Single or three phase B3 foot mounted motors, totally enclosed and fan cooled.

Please note: Speed controll by voltage, i.e. voltage transformers, is not possible!

In accordance with Commission Regulation (EC) no 640/2009 of the European Parliament - eco-design requirements for electric motors - the new international efficiency classes are binding as of 16 June 2011. These guidelines defined by CEMEP and EPACT are regarded as international standard for energy-saving high-efficiency motors for frequencies of 50 or 60 Hz and make the use of IE2 motors mandatory.

With this new and more efficient technology we offer our customers many advantages such as environmentally friendly operation, reduced energy consumption and hence lower emissions. IE2 motors have a higher efficiency even in part load operation and allow optimum adjustment to the operating point. In addition, the IE2 motors generate less noise and develop less heat, which has a positive influence on the efficiency and the cooling requirement of the motor. Please note: IE2 motors cannot be speed controlled by voltage, i.e. voltage transformers.