• Model:TTT/4-710N/H

Belt Drive Cased Axial Fan - 710mm - H version

£ 2,477.88 (excl. VAT)

£ 2,973.46 (inc. VAT)

Belt Drive Cased Axial Fan - 710mm - H version 1Belt Drive Cased Axial Fan - 710mm - H version 2Belt Drive Cased Axial Fan - 710mm - H version 3
Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.

Max Duty - 23,700 m3/hr
Max Absorbed Power - 3,000 W
The casings are manufactured from high grade rolled sheet steel protected against corrosion by cataforesis primer and black polyester paint finish.

The drive system consists of an industrial poly V-belt drive pulley system which is enclosed within metal protective guard.

ATEX versions available.
These fans are often used for paint shops etc as the motor is out of the airstream.

Motors
All the motors are IP55 class F, fitted with ball bearings greased for life.
Electrical supplies:
Three phase 230/400V-50Hz or 400V-50Hz

Download specifications
Shop by price
Shopping Cart
1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x ELTA - Three Phase Transformer 10amps1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x FU 15 16 Frequency Inverter1 x Elta Variable Speed Drive IP66 - 5.5KW2 x Elta Variable Speed Drive IP66 - 1.5KW1 x Elta Variable Speed Drive IP66 - 4.0KW1 x Frequency converter RUCK - FU 075 201 x Duct Termination with Mesh - 450mm1 x Frequency converter FU 075 14 - IP661 x Transformer Speed Control - RTRE- 7.0Amp1 x REU 1.5amp Speed control - Two Speed Five-Step Transformer - Trickle and Boost1 x Transformer 5 Speed Controller - ATC1-4TK1 x TDP-D Pressure Sensor with Display1 x Three Phase Transformer controllers - RMT 1.5 Amp1 x RTRD - Three Phase Speed Controller - 2 Amp1 x Transformer speed controller - ATC1 - 1.5 Amps1 x RTRD - Three Phase Speed Controller - 4 Amp1 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x Two Speed Switch - REGUL-21 x Speed Controller - REB51 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x Speed Controller - REB61 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x Rectangular Airbrick Adaptor1 x Speed Controller - REB11 x MTS10- extractor fan 3 step switch1 x REB-CVF 0-10v Controller1 x Helios PU10 Speed Potentiometer (Flush Mounted)1 x MTP 10, 10K, Speed control1 x Elta Variable Speed Drive IP66 - 2.2KW1 x Round ceiling diffuser 400mm1 x Silentub - STUB 1001 x Elta - Room Sensor - Temp/Humid/C021 x Compact SCD500/4-3AC1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x BDS 800 RA b/d shutter1 x Egg Crate Grille with Dust panel filter 1 inch- 595x5951 x Single Deflection Grille 400mm with OBD damper1 x CBA-100 Inlet Flange for CBT-1001 x CBM Low Pressure Centrifugal Fan - CBM 9/7 4 Pole 373watt CVR1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Biflow SB400-CON2-3 - High Temperature Bifurcated Fan1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH
£ 20,792.68
Best sellers
Heat Resistant In-line Axial Fan - VOK 150/120 H Heat Resistant In-line Axial Fan - VOK 120/100 H VA 12/2 T - High Temp Axial Fan, Heat Resistant In-line Axial Fan - VO-150 Biflow SB250-CON4-1 - High Temperature Bifurcated Fan Heat Resistant In-line Axial Fan - VO-120 CTHB Kitchen/High Temp Roof Fan Heat Resistant In-line Axial Fan - VOK 135/120 H
Specials
BD9/9 centrifugal M4 0.35Kw
BD9/9 centrifugal M4 0.35Kw
£ 399.00 now £ 350.00
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 11.49

Look good, works well, except the shaft of the lanellae cuts...