• Model:TTT/4-900N/H

Belt Drive Cased Axial Fan - 900mm - H version

£ 5,019.36 (excl. VAT)

£ 6,023.23 (inc. VAT)

Range of cylindrical cased axial flow fans with motor located externally to the fan casing and incorporating a belt driven impeller making this range suitable for continuous operation up to 120ºC.

Max Duty - 44,00 m3/hr
Max Absorbed Power - 7,500 W
The casings are manufactured from high grade rolled sheet steel protected against corrosion by cataforesis primer and black polyester paint finish.

The drive system consists of an industrial poly V-belt drive pulley system which is enclosed within metal protective guard.

ATEX versions available.
These fans are often used for paint shops etc as the motor is out of the airstream.

Motors
All the motors are IP55 class F, fitted with ball bearings greased for life.
Electrical supplies:
Three phase 230/400V-50Hz or 400V-50Hz

Download specifications
1 x 110 x 54mm Flat Channel Connector1 x Airvent Ceiling Sweep Fan - 36 inch - 4441221 x Airvent Ceiling Sweep Fan - 48 inch - 4441231 x Hydor Typhoon Circulation Fans - HVFB - 450mm1 x U42K Screws for duct1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x Flanged Spigot - 100mm1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 125mm Round Wall Plate1 x Spiral Ducting 3 Meters - 630mm1 x 125mm - 100mm Round Reducer1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x HCF - Ceiling Fan 1400mm (56 inch)1 x Ducting 45 Degree Bend - 560mm1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x TUNE-R-560-2-M1 - Control Damper1 x Airvent ceiling fan controller1 x STF1 Oscillating Tower Fan1 x GORDON W 30/12″ ET Oscillating wall mounted fan with remote control1 x Nordik International Plus 90/36 - Ceiling Sweep Fan Range1 x Spiral Ducting 3 Meters - 80mm1 x Etamaster EM 200 EC 01 inline mix-vent fan1 x Etaline 200 - EC1 x Etaline 200mm1 x JETLINE-200 - In Line Centrifugal Duct Fan1 x Ducting 90 Degree Bend - 710mm1 x ERR 20/1 Centrifugal inline fan1 x Quietflow SQS200-1ECL - Centrifugal Box Fan1 x Dektite Combo Pipe Flashing - DC210REC1 x Spiral Ducting 1 meter - 400mm1 x Two Speed Switch - REGUL-22 x Flanged Spigot - 560mm1 x Ductwrap Insulation DW501 x Ducting T Piece Equal - 500mm1 x Spiral Duct Grille Termination - 560mm1 x EC-Basic-T temperature1 x Ducting 45 Degree Bend - 150mm1 x Spiral Ducting 1 meter - 560mm1 x Curved boot - 560mm1 x AL 315 EC 01 AXIALINE - High Performance Long Cased Axial Fan1 x MTP 10, 10K, Speed control1 x AW Sileo EC Plate Axial Fan - Three Phase - 710mm
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...