• Model:SB500-CYL4-3

Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - 500mm

£ 2,402.14 (excl. VAT)

£ 2,882.57 (inc. VAT)

Biflow SB (CYL) Bifurcated Cylindrical Axial Flow Fan - SB500-CYL4-3 - Three Phase

Applications
This unit is typically used for Kitchen Extract, Spray Booths, Hot Gas Situations, Corrosive Atmospheres, Boiler Houses and Heavy Industrial.

Max Duty - 8,280 m3/hr
Speed RPM - 1415
Three Phase - 380V to 415V / 50Hz
Max Power Absorbed - 0.75 KW
Suitable for operating temperatures up to +200°C
DBA @ 3m - 62 dB Inlet

Casing
The fan has all metal casing giving a long lasting and robust construction. The units are constructed from sheet steel and has both motor and impeller mounted in the length of the unit casing. The motor is in a single entry tunnel into the casing, out of airstream, making the unit suitable for temperatures up to +200°C. All casing parts are heavy gauge mild steel sheet, roll formed and welded, then hot dip galvanised to BS EN ISO 1461:1999 after fabrication.

Motors
Motors are foot mounted totally enclosed metric type to IP55, it is fitted with sealed for life bearings, the motor has a standard industrial paint finish and Class H insulation to EN 60034-5.

Impellers
This unit has adjustable pitch aerofoil impellers. Which are provided with blades made from high quality pressure die cast aluminium (LM6) and are made in a natural finish.

Quality Management
Units are to be designed and manufactured with procedures as defined in BS EN ISO 9001:2008. All SB (CYL) units are to be tested to ISO 5801:2007 (airside performance) and BS 848 part 2:1985 (sound performance).

MODEL - SB500-CYL4-3

WEIGHT - 47 Kg

1 x Remote Indicator RED/GREEN - AM121 x Step switch S-5EC, 0-10V1 x MD - Motor Protection Switch (3 Phase)1 x ACO3/B Changeover Panel (Three Phase)1 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x DOL Starter with Isolator - Three phase1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 4501 x Manual Overide Switch - MOS1 x ACO3/BD Changover Panel (Three Phase)1 x MV-B Dual Switch for use with Helios HQW plate fans,1 x HRU Controller1 x Male Ducting Connector - 450mm1 x Soler & Palau - HXTR/4-450/H - IP541 x DS-2 2-Speed Switch (3 Phase)1 x REV-3POL ATEX 11kW-25A ON/OFF1 x ACO3TO-ADS-VFC-7.1A1 x JETLINE-150 - In Line Centrifugal Duct Fan1 x PREP/COOK Switch for use with TCBTx2 PACK's1 x Elta Cased Axial Flange - 500mm1 x Ducting T Piece Equal - 560mm1 x Bathroom Fan -Envirovent- Silent 100 T (Timer Model)1 x Duct Humidistat - HS4_hdt1 x Ducting 90 Degree Bend - 560mm1 x CMRT/2-451 7,51 x CMT/4-315/130-4KW - Single inlet centrifugal fan direct driven1 x KVK Slim 250 - Low profile Semi Acoustic Box Fan1 x CMB/2-120/50 0.09kw CENTRIFUGAL SINGLE INLET FANS1 x MEV Spider Additional Spigots1 x CMT-2 250-100 3KW - LG0 Single inlet centrifugal fan direct driven1 x Ducting T Piece Equal - 250mm1 x Helios HQW-500/4 - IP551 x Spiral Rapid Lock Clamp - 125mm1 x Quietflow SQS400-1ECL - Centrifugal Box Fan1 x Pre 10:30 Delivery Surcharge1 x GRA-100 External Grill by S&P1 x HV Wall Mounted Belt Drive Fan 1250mm 400V / 50Hz 1.1kW - Three Phase1 x Airbrick Grille with flange - 204 x 60mm1 x CBB-80N Centrifugal1 x Shoed T Piece Equal - 560mm1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x Ancillary Pack for SB-CYL 630 model
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...