• Model:CADB/T-HE54

CADB/T-HE 54 ECOWATT Series

£ 11,212.47 (excl. VAT)

£ 13,454.96 (inc. VAT)

Compact heat recovery unit with high- efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54). Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB-HE DC ECOWATT
Heat recovery units with built-in electric heater battery. The 3-Way valve is provided as an accessory (see accessories table for this series)
CADB/T-HE DI ECOWATT
Heat recovery units with built-in low pressure hot water coil.
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F. Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Additional information
CADB-HE- Single fase (1/230V 50 Hz).
CADT-HE- Only DI versions: single fase fans and three fase coils (3/400V 50Hz).
Airflows from 450 to 5.400 m 3 /h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line1 x Female Ducting Connector - 80mm1 x Spiral Ducting 1 meter - 355mm1 x Ducting 30 Degree Bend - 250mm1 x Duct Termination with Mesh - 200mm1 x Capacitor 4uf for use with the EBM A2E range1 x Connection Lead for Td ecowatt & PIR sensor1 x Manrose T12 STANDARD Transformer- T12S1 x Ducting T Piece Equal - 80mm1 x Spiral Ducting 3 Meters - 710mm1 x Ducting 90 Degree Bend - 80mm1 x 1mtr Round Ducting - 125mm1 x Ducting T Piece Equal - 710mm1 x Vent Axia ACM 100 inline mixed flow duct fan1 x Spiral Ducting 3 Meters - 355mm1 x Female Ducting Connector - 125mm1 x Anti Vibration Duct Suspension Rings - 200mm1 x Female Ducting Connector - 200mm2 x Spiral Ducting 3 Meters - 250mm1 x 220x90mm x 2m Low Profile Plastic Ducting - 2 Meter1 x 220x90mm 90 Degree Vertical Bend1 x 220x90mm 90 Degree Horizontal Bend1 x HR-500 DP Heat Exchange Unit1 x 3 in 1 Portable Air Conditioner - 1500w1 x Economy Airvent 150mm Fan With Pullcord & Shutters1 x G2E160−AL19−56 FLUE FAN1 x Manrose 150mm - XF150BP1 x Economy Airvent 100mm Fan with Timer & Shutter1 x Spiral Rapid Lock Clamp - 225mm1 x Economy Airvent 100mm Fan with Timer1 x DryBoat 12 - DH1211 INOX (110V) 12 Litre Desiccant Dehumidifier1 x UB47- Universal Insulated Terminal1 x Potentiometer Mounting Kit for RSAS-10K-IP651 x Helios GigaBox 250mm GBW 250/4 centrifugal1 x GB-WSD 250 Weather Protection hood for the Giga-Box Fans - 250mm1 x 400mm x 400mm Metal Grille Box - 250mm Side Entry
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...