• Model:CADB/T-HE54

CADB/T-HE 54 ECOWATT Series

£ 11,212.47 (excl. VAT)

£ 13,454.96 (inc. VAT)

Compact heat recovery unit with high- efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54). Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB-HE DC ECOWATT
Heat recovery units with built-in electric heater battery. The 3-Way valve is provided as an accessory (see accessories table for this series)
CADB/T-HE DI ECOWATT
Heat recovery units with built-in low pressure hot water coil.
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F. Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Additional information
CADB-HE- Single fase (1/230V 50 Hz).
CADT-HE- Only DI versions: single fase fans and three fase coils (3/400V 50Hz).
Airflows from 450 to 5.400 m 3 /h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
1 x Spiral Ducting 1 meter - 500mm1 x ACO3TO-ADS-VFC-7.1A1 x DA7/9 Feet1 x Multi Input Run On Timer - 0 - 20min - CFCU1 x Ducting T Piece Equal - 450mm1 x Ducting 90 Degree Bend - 500mm1 x AxZent 400 D2 High Temp Kitchen exhaust Fan1 x Flanged Spigot - 500mm1 x CHVB/4-3000/315 0,27KW 230V50 VE1 x Duct Split Rings (Pair) -500mm1 x Female Ducting Connector - 500mm1 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 515watt VR RE1 x CBM Low Pressure Centrifugal Fan - CBM 9/9 4 Pole 550watt VR RE1 x Spiral Ducting 3 Meters - 500mm1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x HRU Controller1 x Control with reverse - CR3001 x 110 x 54mm Elbow Bend Male1 x Isolator Switch - EFF-ISO1 x Elta Prema LCD Display1 x ACO3/B Changeover Panel (Three Phase)1 x MD - Motor Protection Switch (3 Phase)1 x Envirovent 4 Way Remote Control Switch - SWHBKRF-41 x Isolator Switch - ISOSW1 x 100mm Wall Duct - 350mm1 x Commercial Single or 3 phase Fan Reversing Switch - RS11 x DS-2 2-Speed Switch (3 Phase)1 x Isolator Relay Controller - 4420301 x 110 x 54mm Low Profile Plastic Ducting - 1 Meter1 x DS-2/2 2-Speed Switch IP54 (Single Phase)1 x AC03TO-ADS-VFS-EN-9A (Three Phase)1 x Curved boot - 250mm1 x Duct Suspension Rings - 355mm1 x Duct Termination with Mesh - 355mm1 x Duct Quick Suspension Rings with Clasp - 315mm1 x Belt Drive Cased Axial Fan - 450mm - L version1 x Elta SLC710/4A-3AC - IP551 x FU 22 04 Frequency Inverter1 x Rectangular Airbrick Adaptor1 x Spiral Ducting 1 meter - 450mm1 x Flanged Spigot - 355mm1 x Soler & Palau - HXTR/4-250/H - IP441 x Kitchavent 2000 Odour control System1 x GENIOX 11 Roof Mounted External Unit
Reviews
Transformer (silent) speed controller - RE 1.5 Amp
Transformer (silent) speed controller - RE 1.5 Amp
£ 132.29

Incredible, Perfect, Silent and Fast delivery ! Thanks "Just...