• Model:CADB/T-HE54

CADB/T-HE 54 ECOWATT Series

£ 11,212.47 (excl. VAT)

£ 13,454.96 (inc. VAT)

Compact heat recovery unit with high- efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54). Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB-HE DC ECOWATT
Heat recovery units with built-in electric heater battery. The 3-Way valve is provided as an accessory (see accessories table for this series)
CADB/T-HE DI ECOWATT
Heat recovery units with built-in low pressure hot water coil.
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F. Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Additional information
CADB-HE- Single fase (1/230V 50 Hz).
CADT-HE- Only DI versions: single fase fans and three fase coils (3/400V 50Hz).
Airflows from 450 to 5.400 m 3 /h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
1 x SLIMPAK 100 EC BOX FAN - 100mm Energy Efficient Acoustic Box Fan1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Quietflow SQSDCV100-1ECL - Centrifugal Box Fan1 x Jetflow-HIT Metal inline - 315mm1 x Female Ducting Connector - 150mm1 x CC-ATEX 504 B Short Cased Axial Fan1 x Round ceiling diffuser 200mm1 x Nicotra AFK 315-40/4M-B1 x Woods 31JMV14/2/6/33 - Long Cased Axial Fan 315mm1 x Etaline Max-Fan - 315mm - E2 011 x Ancillary Sealing Band - 150mm1 x CC-314 M Cased Axial Fan (Single Phase)1 x Ducting T Piece Equal - 150mm1 x Rosenberg RS-315M.3EF Centrifugal Inline Fan1 x 100mm Round Wall Plate1 x Helios GigaBox 315mm GBW 315/4 centrifugal1 x Universal Pipe Fixing Clip1 x Ducting 30 Degree Bend - 150mm1 x Sentinel D-BOX 100S1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x Spiral Ducting 3 Meters - 150mm1 x 100mm - 125mm Round Reducer1 x 125mm - 100mm Round Reducer1 x KVK SLIM 100 EC - Centrifugal Circular Duct Fan1 x Raptor SDA315/4-1AC1 x Ducting 15 Degree Bend - 150mm1 x Soler & Palau TCBT/4-315/H - IP441 x 110 x 54mm Short Rectangular to Round Adaptor male1 x 110 x 54mm Short Rectangular to Round Adaptor Female1 x Acoustic Box Fans (Inline) - CAB-1001 x Anti Vibration Mounts - Small - Pack of 4 - AVM21 x Spigot plate - 150mm1 x 125mm Round Connector with Damper1 x Kitchen Grease Filter - Mesh Type Non standard 450mm x 150mm x 22mm ( CEF450 Replacement)1 x Binks Bullows - Spray Booth Filter1 x 220x90mm Insulated Rectangular Horizontal 90° Bend1 x Metal Inline Fan - VENT-100NK1 x Elta Short Cased ATEX Axial fan - SCX050L2-A9/161 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans1 x Ducting 90 Degree Bend - 1000mm1 x ACOAS/ AC/EC Auto Changeover 8Amp1 x SPI-250 C Iris damper1 x CRBB-2-220-063M1 x Belt Drive Cased Axial Fan - 560mm - H version1 x Belt Drive Cased Axial Fan - 450mm - H version1 x GEO Ground Source Heat Exchanger
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 41.95

Well made and robust, but it was not use for my application ...