• Model:CADB/T-HE54

CADB/T-HE 54 ECOWATT Series

£ 11,773.09 (excl. VAT)

£ 14,127.71 (inc. VAT)

Compact heat recovery unit with high- efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54). Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB-HE DC ECOWATT
Heat recovery units with built-in electric heater battery. The 3-Way valve is provided as an accessory (see accessories table for this series)
CADB/T-HE DI ECOWATT
Heat recovery units with built-in low pressure hot water coil.
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F. Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Additional information
CADB-HE- Single fase (1/230V 50 Hz).
CADT-HE- Only DI versions: single fase fans and three fase coils (3/400V 50Hz).
Airflows from 450 to 5.400 m 3 /h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
3 x Elta Variable Speed Drive IP66 - 0.75KW3 x Elta Variable Speed Drive IP66 - 2.2KW2 x Elta Variable Speed Drive IP66 - 1.5KW1 x Helios TSD 3.0 Transformer Speed Control (400v)1 x Elta Variable Speed Drive IP66 - 7.5KW1 x FU 15 40 Frequency Inverter1 x FRQ5-4A V2 Inverter Speed Controller1 x FU 075 52 Frequency Inverter (IP20)1 x FRQ-10A V2 Inverter Speed controller1 x Frequency converter RUCK - FU 075 201 x Elta Variable Speed Drive IP66 - 4.0KW1 x Frequency converter FU 075 14 - IP661 x FU 22 25 Frequency Inverter1 x FU 15 16 Frequency Inverter1 x Elta Variable Speed Drive IP66 - 5.5KW1 x FRQ5-10A Inverter Speed controller1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x FU 22 04 Frequency Inverter1 x Frequency converter RUCK - FU 075 211 x FU 075 04 Frequency Inverter (IP20)1 x ELTA - Three Phase Transformer 10amps1 x Helios - FIUK-11KW 24.0A - FREQUENCY INVERTER1 x ATEX rated 3-phase Speed Control - R-DK4 KT (EX)1 x ELTA - Three Phase Transformer 3amps1 x Elta 10 Amp Electronic single phase speed controller.1 x ELTA - Single Phase Transformer 2amps2 x Electronic extractor fan speed controller - FSC 1.51 x NKS-D swirl diffuser v-300 x 300mm3 x EC6H - Reversible Group Fan Electronic Controller1 x Balance S Diffuser - NO RING - 125mm1 x Circular Ceiling Diffuser - TST 1251 x Elta 2 Amp Electronic single phase speed controller.3 x Elta 3 Amp Electronic single phase speed controller with TK1 x Circular Ceiling Diffuser - TST 1001 x PCA Diffuser - PCA-3151 x ELTA - Single Phase Transformer 8amps1 x 5-Speed Controller for use with Elta SAX Classic Fans3 x Airvent ceiling fan controller3 x Elta 6 Amp Electronic single phase speed controller with TK1 x ELTA - Single Phase Transformer 16amps1 x Curved Blade Grille 600x600 (2way blow)1 x ELTA - Single Phase Transformer 12amps1 x Circular Ceiling Diffuser - TST 2001 x EFSC-3N- Single Phase Speed Control1 x Elta 3 Amp Electronic single phase speed controller.1 x Round ceiling diffuser 400mm1 x ELTA - Single Phase Transformer 4amps1 x AIRVENT speed control - AIR4019613 x COM-31 x Circular Ceiling Diffuser - TST 1601 x EFSC-6N- Single Phase Speed Control1 x Round ceiling diffuser 200mm1 x Balance S Diffuser - NO RING - 100mm1 x Elta 6 Amp Electronic single phase speed controller.1 x Round ceiling diffuser 300mm1 x PCA Diffuser - PCA-2501 x ELTA - Single Phase Transformer 10amps1 x Round ceiling diffuser 250mm1 x Round ceiling diffuser 350mm1 x Run On Timer - 5s - 4hrs - RT5A2 x Remote Timer Control - 13511 x Helios ZNE Electronic Fan Overrun Timer2 x Vent Axia ACM 150 inline mixed flow duct fan2 x Helios TSW 7.5 Amp Transformer speed controller2 x Helios TSW 0.3Amp Compact Transformer speed controller2 x Push Timer Switch - ZA41 x Vent Axia ACM 100 inline mixed flow duct fan2 x Three Phase Transformer controllers - RMT 1.5 Amp3 x MV-B Dual Switch for use with Helios HQW plate fans,2 x Multi Input Run On Timer - 0 - 20min - CFCU2 x Transformer 5 Speed Controller - ATC1-10TK1 x Transformer 5 Speed Controller - ATC1-8TK3 x Single phase speed controller by auto-transformer - RMB 1.5 Amp2 x Envirovent Silent MV160/100T Mixvent - Timer Model - 100mm - (5 year warranty)1 x Envirovent 4 Way Remote Control Switch - SWHBKRF-43 x Vent Axia ACM 125 T (Timer Model) inline mixed flow duct fan2 x Remote controller FLEX - for VEKO INT1 x HCFC 1.7 - Reversible Speed Controller for HCF sweep fans4 x Vent Axia ACM 125 inline mixed flow duct fan2 x CS2 Current Switch2 x TG-K Duct temperature sensor1 x MWS 3 – Transformer Controller With Motor Protection2 x 7 Day Programmable TIMECLOCK3 x Systemair Save Connect 2.0 Internet Module2 x Helios TSW 3 Amp Transformer speed controller1 x TTC-2000 Three phase electric heater controller1 x ACO8AC/EC AutoChangeover panel1 x ACOAS/ AC/EC Auto Changeover 8Amp3 x Single phase speed controller by auto-transformer - RMB 3.5 Amp3 x Single phase speed controller by auto-transformer - RMB 8.0 Amp2 x Helios HQW-200/2 - IP552 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan2 x Transformer 5 Speed Controller - ATC1-12TK1 x KMBI 225 Connector rectangular/circular to install on the discharge of CMT1 x DEF-140T Inlet Guard for the CBT-100N1 x Elta ACO Panel 149-ACO14E1 x CONTROL ECOWATT - Basic1 x EM30-24 Electro-Mechanical Control Panel1 x EC-Vent control board1 x Envirovent G4 Filter - SL-G4/F74 x MWS 1.5 – Transformer Controller With Motor Protection4 x Helios TSW 10 Amp Transformer speed controller4 x Helios TSW MCB Amp Transformer speed controller1 x ACO 149-ACO1/EDV1 x Elta ACO Panel 149-ACO18B3 x Isolator Switch - ISOSW3 x Helios HQW-630/4 - IP552 x TG-K3/NTC10-01 - Duct temperature sensor1 x CBS-60 Outlet Flange for CSB/CBT-601 x ERR 20/1 Centrifugal inline fan1 x S & P Aluminium Axial Fan Louvre Shutter - PER-CR- 6301 x EC-Vent Room Unit1 x RDS 11 Helios Transformer Controller With Motor Protection2 x Vent Axia T-Series Controller1 x Skyflow SSR Horizontal Roof Cowl SSR31/35B2 x Skyflow SSR Horizontal Roof Cowl SSR31/35BS1 x CMT-2 225/090 1.1KW - Single inlet centrifugal fan direct driven1 x U-EK plastic housing IP65 - for use with the U-EK230E Motor Protection1 x EM30-24 Control Panel Commissioning Service3 x WS - Reversing Switch from Helios Fans2 x Helios HQW-200/4 - IP552 x Transformer (silent) speed controller - RE 3.0 Amp2 x Transformer (silent) speed controller - RE 1.5 Amp2 x Multiflow SMB550/4-1AC1 x ERR 31/1 Centrifugal inline fan1 x KKS 100 silencer-section - For use with the MUB 100 size Fans.1 x Rectangular Airbrick Adaptor3 x Commercial Single or 3 phase Fan Reversing Switch - RS12 x Temperature Fan Speed Controller - ATCP4-WMS2 x Helios TSW 1.5 Amp Transformer speed controller1 x Easy-fix termination kit - High Rise Ventilator - EFT1 x Transformer Speed Control - RTRE- 12.0Amp1 x F7 Mini-Cell panel filter - 594 x 5941 x Single phase speed controller by auto-transformer - RMB 10.0 Amp1 x Transformer 5 Speed Controller - ATC1-4TK1 x KMBI 180 Connector rectangular/circular to install on the discharge of CMT1 x CMT-2 200/80 1.1KW - Single inlet centrifugal fan direct driven1 x REE-1 Electronic Speed Controller2 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x FAST-TRACK RANGE 75mm - Click Ring (1 bag of 10)1 x Quietflow SQS400-1ECL - Centrifugal Box Fan
Reviews
Duct Mounted Inline Filter - EU4
Duct Mounted Inline Filter - EU4
£ 44.99

Well made and robust, but it was not use for my application ...