• Model:CADB/T-HE54

CADB/T-HE 54 ECOWATT Series

£ 11,212.47 (excl. VAT)

£ 13,454.96 (inc. VAT)

Compact heat recovery unit with high- efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass, 25mm thickness in false ceiling versions (Models 04 to 21 ) and 50mm in Outdoor versions (Models 40 and 54). Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB-HE D ECOWATT
Heat recovery units without additional incorporated heater.
CADB-HE DC ECOWATT
Heat recovery units with built-in electric heater battery. The 3-Way valve is provided as an accessory (see accessories table for this series)
CADB/T-HE DI ECOWATT
Heat recovery units with built-in low pressure hot water coil.
Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B. Models 40 and 54: Three phase motors, IP55, Class F. Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory).
It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Additional information
CADB-HE- Single fase (1/230V 50 Hz).
CADT-HE- Only DI versions: single fase fans and three fase coils (3/400V 50Hz).
Airflows from 450 to 5.400 m 3 /h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
CADB/T 40 and 54 models with frequency converter included inside the unit (an inverter for each fan, which allows independent adjustment of supply and extract airflow).
1 x AL 710 D4 mounting Feet (Pair)1 x DA12/9 Feet1 x Ducting 45 Degree Bend - 1000mm1 x Circ Outlet spigot for MUB/T Fans - CCM 560mm1 x Fresh Air control carbon filter - 125mm1 x EB-100N S - Centrifugal Fan1 x 204x60mm Flat Channel Connector1 x ELS-GU Flush Mounted Casing1 x Ducting Reducer Long - 1000mm to 630mm1 x GX6 Wall Kit1 x FSAF450FTX 450 mounting feet (Pair)1 x Ducting Y Piece - 1000mm1 x Ducting 90 Degree Bend - 1000mm1 x Male Ducting Connector - 1000mm1 x DA 15/15 Feet1 x Duct Split Rings (Pair) -1000mm1 x HQS Bathroom Axial Flow Fan - 125mm1 x Anti Vibration Duct Suspension Rings - 160mm1 x DDMP 09/07 Mounting Flange1 x AMCL1002 - LPHW coil only1 x HIMF - Mixed Flow Fan 100mm Inline Fan1 x CBS-100 Outlet Flange for CBT-1001 x Ducting 90 Degree Bend - 160mm1 x ASF 355-500 inlet flange DVS1 x Bell Mouth Inlet for Elta cased fans - 800mm1 x HIMF - Mixed Flow Fan 150mm Inline Fan1 x Connection Lead for Td ecowatt & PIR sensor1 x FN091-SDK.6N.V7P21 x CBS-130 Outlet Flange for CBT-1301 x CBS-60 Outlet Flange for CSB/CBT-601 x Cased Axial Fan Extension - 400mm dia1 x Manrose 150mm - XF150BHP1 x DDMP 07/07 Mounting Flange1 x CBA-130 Inlet Flange for CBT-1301 x Circ.connection-125 fo EX-140 ATEX unit1 x Economy Airvent 150mm Fan1 x DDMP 10-10 FLANGE1 x DDMP 12-12 FLANGE1 x Economy Airvent 100mm Fan with Timer1 x CBA-80 Inlet Flange for CBT-801 x Ducting T Piece Equal - 160mm1 x 220x90mm Mounting Clip (Individual)1 x Spiral Ducting 3 Meters - 180mm1 x SPI-250 C Iris damper1 x Differential Pressure Switch - 50 - 500 Pa - IP541 x Ducting 90 Degree Bend - 200mm1 x Metallic Kitchen Extractor - CK35N1 x 220x90mm Flat Channel Connector1 x Anti Vibration Duct Suspension Rings - 200mm1 x 220x90mm Elbow Bend with 150mm Fixed Spigot1 x Duct Humidistat - HS4_hdt1 x FSD-TD 400 x 200 Fire and Smoke Damper, S, EASY FIX AF, GALV Case, GALV Blades, PM230-TF (SC)1 x Helios DDF-400 Roof Cowl1 x Ancillary Sealing Band - 250mm1 x Elta Wall Cowl SWC45/501 x Curved boot - 500mm
Reviews
Soler & Palau TCBB/4-450/H - IP65
Soler & Palau TCBB/4-450/H - IP65
£ 481.79

Delivered super promptly yesterday, next day. Only just fitt...