• Model:CADB-HE-D08

CADB/T-HE PRO-REG Series

£ 4,946.68 (excl. VAT)

£ 5,936.02 (inc. VAT)

This unit is Model:CADB-HE-D 08 RH PRO-REG VE

Compact heat recovery unit with high-efficiency (up to 93%) counter-flow heat exchanger, EUROVENT certified. The casing is made from plasticised galvanised steel in white. Panels are double skinned with thermo-acoustic flameproof insulation (M0), made from 25mm thick fiberglass in false ceiling versions (Models 04 to 33 ) and 47mm in outdoor versions (Models 45 and 60).
Configurable and airtight supply and exhaust spigots, suitable for horizontal and vertical installation.
Minimum outdoor temperature -10ºC. For lower temperatures it is necessary to use preheating batteries located in the suction of the outside air.

Applications
Commercial premises, offices, restaurants, public buildings, schools.
CADB/T-HE D PRO-REG

Heat recovery units without additional incorporated heater.

CADB/T-HE DC PRO-REG
Heat recovery units with built-in hot water coil.
The 3-Way valve is provided as an accessory (see accessories table for this series)

CADB/T-HE DI PRO-REG
Heat recovery units with built-in electric heater battery.

Motors
Models 04 to 21: EC motors with integrated electronic protection, IP44, Class B.
Models 33 to 60: EC motors with integrated electronic protection, IP 54 class B.

Fans
Plug-fan with backward curved impeller.

Filters
- F7: Low pressure F7 filters for supply air.
- M5: M5 filters for extract air.
- Possibility of mounting a second filter (accessory). It is possible to complement the heat recovery unit with a specific range of water and direct expansion coils. Also available, the exclusive module IAQ with high efficiency VOCs and particles filtration that guarantees the filtration and purification of the outdoor air.

Control
It includes manual or automatic control for modes: adjustable airflow (VAV), constant pressure (COP) or constant airflow (CAV), via CO2, pressure or airflow sensors (accessories).
Post-heating stage versions (-DC/-DI) allow postheating management depending on the temperatures taken by the temperature probes incorporated in the design.

Ranges of product according to the type of operating control:
VAV- variable air volume
Fan speed can be adjusted with a 0 - 10V signal from the remote touchscreen panel (included) or an external CO2, temperature or humidity sensor (accessories).
CAV - constant air volume
Manual pre-setting of 2 working points the fans are controlled separately, regardless of the degree of fouling of the filters. It is necessary to add two pressure sensors TDP-S as external accessory.
COP - constant pressure
Constant pressure measured by an external pressure sensor TDP-S (accessory). It is necessary to add a pressure sensor TDP-S as an external accessory*.
* To control supply and extract air separately it is necessary to install 2 pressure sensors TDP-S.

Additional information
Single phase (CADB-HE PRO-REG) and three phase models (CADT-HE PRO-REG).
Airflows from 450 to 6100 m3/h at 150 Pa of static pressure available.
All versions and models include by-pass.
Mounting flexibility provided by the interchangeable side panels.
1 x 110 x 54mm Round to Rectangular Adaptor - Long1 x Acoustic Box Fans (Inline) - CAB-1001 x Multiflow SMB450/4-3AC1 x CBP-DC 15/151 x Spiral Ducting 1 meter - 200mm1 x Soler & Palau - HCBT/6-800/H - IP651 x Elta SLC500/2A-3AC - IP551 x Jetflow-HIT Metal inline - 315mm1 x Raptor SDA500/46-3AC1 x Etaline 355mm - E2-011 x 400mm x 400mm Metal Grille Box - 250mm Side Entry1 x DEF-1000-AN1 x Metal Inline Fan - VENT-315NK1 x LCA403226 - Long Cased Axial Fan1 x Soler & Palau - HXTR/6-800/H - IP541 x 110 x 54mm Vertical 45 Degree Bend1 x AR Sileo 500 Cased Axial Fan Guard - SG AXC/AM/AR 5001 x Mini Diffuser - 100mm1 x MFQ450-14 - SQUARE MIXED FLOW FAN - 450mm Single Phase1 x Egg Crate Grille with G2 Dust panel filter 1 inch- 300x3001 x AL 400 D2 01 AXIALINE - High Performance Long Cased Axial Fan1 x TD2000 Mixvent - 315mm1 x Jetflow Silent SJMF-S 200-1EC1 x Impeller Side Guard - 250mm1 x KRJ - 120 Inlet Guard for CBB/CBT fans1 x 110 x 54mm Rectangular Wall Plate1 x Etaline 315mm - D2 01 3 Phase1 x Helios GigaBox 450mm GBD 450/4/4 centrifugal1 x Inline Axial Fan - VOK-C 3151 x Inclined Kurb support for CTHB/6-4001 x Singleflow SSDL500-1EC1 x Helios HQW-250/2 - IP551 x Elta Standard Ambient Flexible Connector - 1000mm1 x GENIOX 11 Roof Mounted External Unit1 x Venturia Whole House Ventilation1 x EnergiSava 210 Low Energy Heat Recovery Unit1 x Spigot plate - 900mm1 x AEL - Outlet Flexible Connection for TLZ450 R1 x HCFT/6-630mm plastic impeller plate fan1 x Acopel F400-400/1601 x Female Ducting Connector - 100mm1 x Helios VARW 225/4 High Pressure Duct Fan1 x Helios HQW-500/6 - IP55
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56

I have a loft mount extractor fan which was very noisy. I ...