CBM 10/10 4 Pole 550watt RE VR (3 Phase)

CBM 10/10 4 Pole 550watt RE VR (3 Phase)
Totally enclosed motor versions of this popular fan, often found in commercial cooker hoods..
CBM range of double inlet direct drive low pressure centrifugal fans manufactured from galvanised sheet steel.
Useful for industrial and commercial applications, using rectangular ducting. ie chip shops, restaurants etc.
All the models are fitted with forward curved centrifugal impellers manufactured from galvanized sheet steel.
Available, depending upon the model, with single phase or three phase motors, in 4 or 6 poles.
Motors
All standard motors (1) are IP10, Class B, equipped with thermal protection and ball bearings greased for life.
Electrical supply:
Single phase 230V-50Hz (capacitor fitted on the fan housing). Three phase 230/400V-50Hz . (See characteristics chart).
(1) Except CBM-380/380 fitted with an aluminium housing closed motor IP44 class F.
Additional Information
Mounting feet as accessory, allowing 4 different positions.
On request
Aluminium housing closed motors, IP44, class F (T version) is advised for use in a kitchen environment.
Please inquire if you are using with a speed controller as not all of the enclosed motor versions are speed controllable.
Coupling flange fitted at the fan outlet (B version).

These are NOT high temperature fans but can be used for kitchens if used with filters and suitably placed away from direct heat. More suitable are high temperature fans especially the motor out of airstream versions..
Please contact us for more technical details or other versions or fitting accessories.
Equivalent directly to some Chaysol Da- type fans. Call for details.