• Model:431614

Centrif Duo Plus - Timer

£ 289.18 (excl. VAT)

£ 347.02 (inc. VAT)

Centrif Duo Plus TIMER

• Meets current Building Regulations Approved Document F
• Optional filter available
• Easy installation
• Fan can be wall or ceiling mounted
• Suitable for both kitchen and utility rooms
• Constant trickle boost speed available on DP & HTP models
• IPX4 Rated

Ultra Quick Ventilation Centrif Duo Plus is designed to provide extraction levels that comply with Building Regulations Approved Document requirements, with special humidity sensing variants for local authority use.
The Centrif Duo Plus is for kitchens and utility rooms and large bathrooms. Surface mounting directly into standard 100mm diameter ducting, through the wall or ceiling installation.
Fast Installation The Centrif Duo Plus has a 100mm circular spigot. The Flush mounting kit enables the spigot to be converted to a side outlet.
The spigot also encloses a built-in, spring operated back draught shutter.
The Centrif Duo Plus Range can be wall mounted using a telescopic wall fitting kit available as an accessory (requires a 115mm diameter hole). For ceiling applications the range is ducted either through a soffit outlet or roof cowl assembly.
There is convenient access for wiring which accommodates surface or recessed installation.
Improved Humidistat Control Humidistat is selectable for either kitchen or utility speed separate to any other control to reduce nuisance noise. Boost operation by pullcord or switch live.
Centrif Duo Plus T (Timer) Two speed with adjustable timer between 2-30 minutes. Choice of two speeds for boost, set at installation.
Model Stock Ref 431614
1 x AW Sileo EC Plate Axial Fan - Three Phase - 800mm1 x Biflow SB315-CON2-3 - High Temperature Bifurcated Fan1 x Belt Drive Cased Axial Fan - 800mm - L version1 x FAST-TRACK RANGE 75mm - Semi-Rigid Duct 50M1 x FAST-TRACK RANGE 75mm - Adjustable Air Restrictor1 x Duct Tape - Silver - DTape1 x Belt Drive Cased Axial Fan - 900mm - H version1 x Duct Clamps box of 50 - 60mm - 270mm1 x Soler & Palau - HCBT/4-800/L-AX - IP551 x HCFT/6-800-H plastic impeller plate fan1 x HCFT/4-800mm plastic impeller plate fan1 x FAST-TRACK RANGE 75mm - Straight Connector1 x Soler & Palau - HCBT/4-800/H - IP551 x HPA Heavy Duty Flexible Ducting1 x FAST-TRACK RANGE 75mm - Valve Adaptor 90° 125mm1 x DryFan 8 - DH800 8 Litre Desiccant Dehumidifier1 x Access Door for Circular Duct - 400 x 300 - SIZE 451 x Ancillary Pack for SLC-900 for SLC900/6A-3AC and SLC900/6B-3AC1 x Ancillary Pack for SLC-5601 x Blast Gate (Manual) 125mm1 x SG AW 1000 Guard 6-Pole1 x Elta Cased Axial Flange - 315mm1 x Purlin Box 400/450 for RAW Cowls1 x Soler & Palau - HCBT/6-1000/H - IP551 x Flanged Damper 019-0250-STD1 x Blast Gate (Manual) 300mm1 x HXP500/4-3 - 4 Pole - Three Phase1 x Flanged Spigot - 80mm1 x CBM 12/9 515W RE-VR1 x ELTA - Single Phase Transformer 4amps1 x DA7/9 Feet1 x AL 355 Mounting Feet (Pair)1 x B-flow Impeller HCBB/T-450mm1 x Singleflow SSDL500-1EC1 x HRB/6-500-25-APN1 x "VX100" - Standard Bathroom Axial fan - 100mm1 x KVK SLIM 355 EC - Centrifugal Circular Duct Fan1 x Non Vision 150mm x 150mm (Air Transfer) Grille - With Flange - MILL FINISH1 x MFA-AR/AXC 315 mounting foot1 x FU 15 40 Frequency Inverter1 x Ancillary Pack for SLC-3151 x Access Door 450mm x 450mm1 x EB-100N T - Centrifugal Fan with Timer1 x Decor 300-CRZ Bathroom Fan1 x Purlin Box 630/710 for RAW Cowls1 x Spiral Ducting 3 Meters - 80mm1 x Elta Cased Axial Flange - 250mm
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...