• Model:VFD-M10-CLEAR

CLEARANCE - Soler & Palau VFD-M inverter 10 amp IP54

£ 185.00 (excl. VAT)

£ 222.00 (inc. VAT)

*** THIS IS A CLEARANCE UNIT*** The Packaged Inverter range comprises of single-phase (1PH) in, threephase out (3PH) Variable Frequency Inverters specifically intended to control S&P 3PH 230V/400V fans.

Specification
The Inverter control is designed for continuous operation with the maximum rated current load, (10A or 16A, depending on version) on single phase 230 Volts ~ 50Hz supply. 8. The normal equipment temperature range is -10°C to +40°C. 9. The normal equipment humidity range is 20% RH to 90% RH.

The Inverter is not suitable for positioning where corrosive gas, oil, mist etc. are present. 11. The unit meets the EMC requirements of EN 61000-3-3:2015 and EN 610003-2:2015 12. The control is housed in an enclosure that is suitable for the current rating and is IP54 rated.
1 x AW 650 D6-2-EX Explosion Proof Axial Fan - ATEX1 x Ducting 90 Degree Bend - 800mm1 x Soler & Palau TCBB/6-630/L - IP651 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -2pole1 x Ducting T Piece Equal - 100mm1 x Flanged Spigot - 100mm1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 650mm1 x Spigot plate - 100mm1 x Duct Suspension Rings - 100mm1 x Ducting 90 Degree Bend - 100mm1 x FlameProof Plate Axial Fan - Single Phase - 10.5 inches - Eexd IIC T4 -4pole1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 350mm1 x Elta Raptor SFB ATEX Plate Mounted Axial Fan- 560mm1 x Spare filter for Energi Sava 200 & 250 HR unit1 x Spare filter pack for Energi Sava 210 HR unit1 x 220x90mm Insulated Rectangular T-Piece1 x 125mm Thermal Duct to Duct Connector - SST-125-DDCON1 x 204x60mm Insulated Rectangular Horizontal 90° Bend1 x 220x90mm x 1m Insulated Rectangular Duct1 x 125mm Insulated 45 Degree Bend1 x 204 x 60mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 204x60mm to 125mm Insulated Straight Adapter1 x 125mm Insulated 90 Degree Bend1 x 125mm Thermal Duct to Fitting Connector - SST-125-DFCON1 x 220x90mm Elbow Plenum with 160mm Spigot1 x 220x90mm Insulated Rectangular Vertical 90° Bend1 x Jetflow-HIT Metal inline - 100mm1 x PRIO-160 160mm Inline Mixvent Fan1 x Elta SCP250/4-1AC - IP551 x Soler & Palau - HCBT/4-560/H - IP651 x Belt Drive Cased Axial Fan - 560mm - H version1 x 204x60mm Double Airbrick Adapter1 x Quietflow SQS500-1ECL - Centrifugal Box Fan1 x Metal Inline Fan - VENT-160NK1 x Soler & Palau - HXBR/4-355/H - IP541 x FSAF1000B1DB Silencer 1043/241 x HRB/6-560-35-APN-C1 x Spiral Ducting 3 Meters - 160mm1 x CADB/T-HE PRO-REG Series1 x Elta SLC560/4A-3AC - IP551 x AIRVENT speed control - AIR4019611 x Revolution SLCX ATEX Long Cased Axial Flow Fan SLCX500/2-3 Three Phase1 x Elta SLC630/4B-3AC - IP551 x Ducting 45 Degree Bend - 1000mm1 x Spiral Duct Grille Termination - 450mm1 x CFI Lite 600 Carbon Filter1 x TCBT/4-400/H EXEIIT3 ATEX1 x KTEX 50-25-4 Fan (ATEX)
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...