Centrifugal Scroll Fans
Commercial Centrifugal Scroll Fans, forward curved and backward curved impellers, different versions and sizes of double and single inlet fans available. Often classified by two numbers, eg. 10/10, 9/9 etc. This indicates the size of the scroll/squirrel cage impeller. ie. 10 inches long, 10 inches diameter. Closed motor or external rotor versions advised for dirty air.
Also known as snail fans.
These need an enclosure to operate and are normally at one end of a system. For inline commercial fans, see our Centrifugal & MixVent Fans or industrial section. for larger units.
Also known as snail fans.
These need an enclosure to operate and are normally at one end of a system. For inline commercial fans, see our Centrifugal & MixVent Fans or industrial section. for larger units.
Displaying 1 to 24 (of 200 products)
BD-10/10 M4-0.59kw Centrifugal
£ 339.00
These forward curved double inlet centrifugal fans are also known as the "Inch Blower" due to their simple impeller design and size. The BD Fan is a high quality forward curved centrifugal fan featuri...
BD-10/10-M6-0.21KW Centrifugal
£ 289.00
These forward curved double inlet centrifugal fans are also known as the "Inch Blower" due to their simple impeller design and size. The BD Fan is a high quality forward curved centrifugal fan featuri...
BD-9/7 -M6 - 0.13kw centrifugal
£ 339.00
DOUBLE INLET CENTRIFUGAL FAN
BD9/7 centrifugal M6 0.13Kw 6 Pole
Range of centrifugal fans with IP rating of 55 and fully ERP compliant from Casals
MANUFACTURING FEATURES:
This fan is single phase
...
BD12/12 M6-0.76Kw centrifugal
£ 539.00
DOUBLE INLET CENTRIFUGAL FAN
Range of centrifugal fans with IP rating of 55 and fully ERP compliant from Casals
MANUFACTURING FEATURES:
This fan is single phase
• Fully made of galvanised steel ...
BD12/12 T6-1.1Kw centrifugal
£ 569.00
DOUBLE INLET CENTRIFUGAL FAN
Range of centrifugal fans with IP rating of 55 and fully ERP compliant from Casals
MANUFACTURING FEATURES:
This fan is three phase
• Fully made of galvanised steel s...
BD15/15 T6-2.2Kw centrifugal
£ 899.00
DOUBLE INLET CENTRIFUGAL FAN
Range of centrifugal fans with IP rating of 55 and fully ERP compliant from Casals
MANUFACTURING FEATURES:
This fan is three phase
• Fully made of galvanised steel s...
BD7/7 centrifugal M4 0.13Kw
£ 269.00
DOUBLE INLET CENTRIFUGAL FAN 4 Pole
Range of centrifugal fans with IP rating of 55 and fully ERP compliant from Casals
MANUFACTURING FEATURES:
This fan is single phase
•130W Motor
• Fully mad...
BD7/7 centrifugal M6 0.04Kw
£ 229.00
DOUBLE INLET CENTRIFUGAL FAN 4 Pole
Range of centrifugal fans with IP rating of 55 and fully ERP compliant from Casals
MANUFACTURING FEATURES:
This fan is single phase
•40W Motor
• Fully made...
BD9/7 centrifugal M4 0.35Kw
£ 259.00
DOUBLE INLET CENTRIFUGAL FAN
BD9/7 centrifugal M4 0.35Kw 4 Pole
Range of centrifugal fans with IP rating of 55 and fully ERP compliant from Casals
MANUFACTURING FEATURES:
This fan is single phase
...
BD9/9 centrifugal M4 0.35Kw
£ 319.00
DOUBLE INLET CENTRIFUGAL FAN
BD9/9 centrifugal M4 0.35Kw 4 Pole
Range of centrifugal fans with IP rating of 55 and fully ERP compliant from Casals
MANUFACTURING FEATURES:
This fan is single phase
...
BD9/9 centrifugal M6 130W
£ 339.00
DOUBLE INLET CENTRIFUGAL FAN
Range of centrifugal fans with IP rating of 55 and fully ERP compliant from Casals
MANUFACTURING FEATURES:
This fan is single phase
•130W Motor, 6 pole
• Fully ma...
BDB 630 TL D50 VE - High Pressure Centrifugal Fan
£ 1,950.90
BDB 630 TL D50 VE - High Pressure Centrifugal Fan...
CBM 10/10 - 373watt - 6 Pole
£ 466.20
CBM 10-10 373W 6P, 230 VR
Supplied without flange
PART NUMBER: 5128061800
Download specifications of the range HERE...
CBM 10/8 6P 245W RE VR
£ 645.75
CBM 10/8 6P 245W RE VR
All models incorporate speed controllable external rotor motor, fitted with thermal protection and ball bearings
Motors
IP44, Class F (models 7/7 and 7/9).
IP55, Class F (mo...
CBM 12-12 1100w 6P Three Phase
£ 522.90
CBM 12-12 1100w 6P - Three Phase, open motor.
Download specifications of the range HERE...
CBM 12/9 736W 6PT C - Closed Motor
£ 615.00
CBM Commercial Fan with Flange..
CBM 12/9 736W 6PT C -B9- Closed Motor
3 phase
6 Pole
Model: 5128977700
736 Watts.
Comes with Flange.
Download specifications of the range HERE...
CBM 12/9 515W RE-VR
£ 805.02
CBM-12/9 515W 6P RE VR IP55 (230V50/60)F V5
Range of direct-drive low pressure double inlet forward curve centrifugal fans.
Casing and impeller manufactured from galvanized sheet steel.
All models ...
CBM 12/9 750W RE-VR
£ 761.25
CBM-12/9 750W 6P RE VR IP55 (230V50/60)F V5
Range of direct-drive low pressure double inlet forward curve centrifugal fans.
Casing and impeller manufactured from galvanized sheet steel.
All models ...
CBM 12/9 CM/AL 1100W 6PT - Closed Motor
£ 545.95
CBM Commercial Fan with Flange..
CBM 12/9 CM/AL 1100W 6PT - Closed Motor
3 phase
6 Pole
Model: 5128081600
1100 Watts....
CBM 15/11 6P C IP55 - Closed Motor - Single Phase
£ 996.45
CBM 15/11 6P C IP55 - Closed Motor - Single Phase
5128993800 ...
Displaying 1 to 24 (of 200 products)
1 x Jetflow-HIT Metal inline - 160mm1 x HQS Bathroom Axial Flow Fan - 125mm1 x Elta - SMT 125 Mixvent Inline Fan - Clearance Stock Line2 x Hydor Typhoon Circulation Fans - HVFB - 300mm1 x DV-ROF-V-225 Roof mounted unit1 x Fresh Air control carbon filter - 125mm1 x Ducting 90 Degree Bend - 355mm1 x Duct Termination with Mesh - 355mm1 x Etaline Max-Fan - 315mm - E2 011 x Spigot plate - 355mm1 x Flanged Spigot - 355mm1 x Female Ducting Connector - 355mm1 x Duct Fast Clamps - 355mm1 x Mellizo XL EcoWatt 3000 - Twin Fan1 x Commercial Activated Carbon Filters - Panel Type - 20" x 20" x 1 - ACP1 x CAB-200 ECOWATT Energy Efficient Acoustic Box Fan1 x Activated Carbon Discarb Cell - Grade 50 - EXTRA DUTY - 445H x 445W x 595Dmm ACTUAL1 x HRB/4-500-30-APNC1 x Spiral Ducting 1 meter - 800mm1 x GORDON W 30/12″ ET Oscillating wall mounted fan with remote control1 x HRB/6-500-25-APN1 x Hydor Typhoon Circulation Fans - HVFB - 450mm1 x Elta Quietflow Twin SQT500-1ECL1 x CFI In-line 3000 - Carbon Filter1 x Spigot plate - 800mm1 x MELL-USD 3000 Rectangular to Circular Adaptor 355 Dia1 x Elta Wall Cowl SWC45/501 x Elta SCP500/4-1AC - IP551 x Classic SAX30/12AR Window/Wall Mounted1 x Ancillary Pack for SB-Biflow 400 model1 x Etaline 200mm1 x Vent Axia KAF Kitchen Extract Fan - 450mm - 2 Pole - Single Phase1 x Ducting 15 Degree Bend - 150mm1 x Classic SAX23/9A Window/Wall Mounted1 x HD-LL Series 600x6001 x KVK Slim 125 - Low profile Semi Acoustic Box Fan1 x HD-LL Series - 100mm with NFA-S2, Multi Voltage Damper Actuator1 x Motorised Volume Control Damper - 400mm1 x SPI-125 C Iris damper1 x 125mm Round Equal T Piece1 x filter pack (set of 2) pt no. 4438891 x Genius Whole house unit -1 x EC-Basic-T temperature1 x 125mm Wall Duct - 350mm1 x 204 x 60mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Male Ducting Connector - 80mm1 x Thermostat - Adjustable Room Thermostat - 230V1 x Metal Inline Fan - VENT-125NK2 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Atex Inline Fan 180mm - ERM18EXE1 x Duct Mounted Filter Box - G4 Grade Panel - 100mm1 x Atex Inline Fan 250mm - ERM25EXE1 x Insulated extract Plenum 6+11 x DDMP 12-12 FLANGE1 x DDMP 09/07 Mounting Flange1 x Elta Qube SQU Centrifugal Box Fan - SQU1/4-3HT - Three Phase1 x Raptor SDA350/4-1EC1 x Helios SVR EC 160 B – SlimVent Centrifugal Fan Box1 x Quietflow SQS315-1ECL - Centrifugal Box Fan1 x Shoed T Piece Equal -100mm1 x KVK SLIM 160 EC - Centrifugal Circular Duct Fan1 x DDMP 07/07 Mounting Flange1 x Helios GigaBox 355mm GBW 355/4 centrifugal1 x Singleflow SSDL315-1EC1 x Elta SLC355-1EC -IE5 Motor- IP551 x 316 Grade Stainless Steel Flat Bar Flange - 400mm1 x Flexible PVC Ducting - 204x601 x Duct Suspension Rings - 250mm1 x SEL355/4-1AC1 x Cased Axial Fan Extension - 400mm dia1 x Elta Variable Speed Drive IP66 - 2.2KW (1ph to 3ph)1 x FU 075 04 Frequency Inverter (IP20)1 x Duct Termination with Mesh - 125mm1 x Elta 3 Amp Electronic single phase speed controller with TK1 x Spiral Rapid Lock Clamp - 125mm1 x Ducting Reducers Short - 315mm-250mm1 x CAB-400 ECOWATT Energy Efficient Acoustic Box Fan1 x Ancillary Sealing Band - 315mm1 x Elta Variable Speed Drive IP66 - 0.37KW (1ph to 3ph)1 x Elta SPA450/4-1AC - IP541 x HCFB/4-450mm plastic impeller plate fan1 x SWF-100X Sidewall Mounted Extractor Fan1 x Hydor HPA450/6-1A1 x Plastic Kitchen Extractors - CK25N1 x Soler & Palau - HCBT/4-450/H - IP651 x Raptor SDA500/6-1AC1 x Raptor SDA500/4-1AC1 x Kitchen Extract Grille with Grease Filter - 600 x 100 - NO GRILL BOX1 x CBMT/Q 200-54 1 HEATER KIT1 x Air Trak Heater-100mm1 x EX 140A-2 (Three Phase) Centrifugal Fan (ATEX)
Best sellers
Reviews
Circular Inline Silencers - 0.6M long - SLU-600
£ 50.56
I have a loft mount extractor fan which was very noisy. I ...