• UPC/EAN:8413893658807
  • Model:TCBBx2-630

Contra Rotating TCBBx2-630 Cased Axial - Single Phase - IP65 - Soler & Palau

£ 1,357.36 (excl. VAT)

£ 1,628.83 (inc. VAT)

TCBBx2-630 Contra Rotating Cased Axial fan from Soler & Palau - (Turboprop)- single phase - IP65.

Develops high pressure for longer duct runs.

Often used in kitchen extract and greasy applications such as restaurants and takeaways.
Max Duty - 16,560 m3/hr
Max Power Absorbed - 3,671W
The TCBBx2 range of cylindrical cased axial fans are fitted with aluminium impellers and manufactured from high grade rolled galvanised steel and protected against corrosion by cataforesis primer and black polyester paint finish. Used to be called TIPO.

Contra rotating TCBBx2 system with two complementary impellers allowing the duplication of the pressure with the same air volume, manufactured from die-cast aluminium.

All TCBBx2 models are supplied with pre-wired wiring junction box located on the outside of the fan casing for easy wiring access.

Available with single or three phase 4 poles motors.

Motors
~ All the motors are IP65, Class F insulation (1), equipped with thermal protection.
~ Single phase motors are variable voltage (for TCBBX2/4-630, only if the ambient temperature is up to 40 º C).
~ Three phase motors suitable for inverter control.
Electrical supplies:
~ Single phase 230V-50Hz. (Capacitor located inside the wiring terminal box).
~ Three phase 400V-50Hz
~ Working temperatures from -40ºC up to 70ºC.

For Matching Flanges, Flexi Connectors, Protection Guards and Mounting Feet - Please Click HERE

PDF Files


TCBB/Tx2 Datasheet

1 x AIRVENT speed control - AIR4019611 x Elta Skyflow SSRL710-1EC1 x Elta SLC900/4B-3AC - IP551 x DA12/12 Feet1 x Elta EC Electronic Controller1 x 100mm Wall Duct - 350mm1 x Mounting Feet (Pair) for SLC-630-060B-06301 x Acopel F400-200/1601 x SG AW-710 BGr , RAL 90051 x CBM Low Pressure Centrifugal Fan - CBM 12/12 6 Pole 736watt CVR1 x Spiral Ducting 1 meter - 560mm2 x DA10/10 Feet1 x Elta Cased Axial Flange - 400mm1 x 204x60mm Elbow Bend with 100mm Fixed Spigot1 x ELTA - Single Phase Transformer 2amps1 x KV 200 L Sileo1 x Spiral Duct Grille Termination - 560mm1 x Vent Axia ACM 100 T (Timer Model) inline mixed flow duct fan1 x Mounting Feet (pair) for SB-CON 4001 x Mounting Feet 160-180 (pair) for ADH E0-01601 x DA12/9 Feet1 x DA9/7 Feet1 x WGZ500- Vent Axia Fan Guard 500mm1 x 204x60mm Rectangular to 125mm Round Adaptor1 x Ducting 45 Degree Bend - 560mm1 x KRJ - 250 Inlet Guard1 x Elta SCP400/4-1AC - IP551 x DA9/9 Feet2 x Flanged Spigot - 560mm1 x SG AW 710 Guard grille (GFC)1 x Purlin Box 630/710 for RAW Cowls1 x Curved boot - 560mm1 x ELTA - Single Phase Transformer 12amps1 x 204x60mm Flat Channel Connector1 x 204x60mm x 500mm Long Hi-Flow Duct Silencer1 x DA7/7 Feet1 x Biflow SB250-CON4-1 - High Temperature Bifurcated Fan1 x Helios GigaBox 400mm GBW 400/4 centrifugal1 x Duct Split Rings (Pair) -560mm1 x Spigot plate - 560mm1 x Shoed T Piece Equal - 560mm1 x CTHB/6-2501 x Ducting 90 Degree Bend - 560mm1 x Etaline 200 - EC1 x Soler & Palau TCBB/4-560/L - IP651 x Etamaster EM 200 EC 01 inline mix-vent fan2 x BDS 300/315 RA b/d shutter1 x JCA 560 - Back Draft Shutter for CRHB/CRHT Roof Fans1 x Female Ducting Connector - 400mm1 x Male Ducting Connector - 250mm1 x AL 1000 D4 mounting Feet (Pair)1 x Flanged Damper 019-0250-STD1 x 220x90mm 45 Degree Horizontal Bend1 x Ducting Y Piece - 400mm1 x DEF-1000-AN1 x SG AW 910 Guard grille (GFC)1 x TD ECOWATT 250/100 Inline Duct Fan - TD-ECOWATT1 x FSAF450FTX 450 mounting feet (Pair)1 x Bell Mouth Inlet for Elta cased fans - 800mm1 x Impeller Side Guard - 250mm1 x Impeller Side Guard - 800mm
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
DAOSL Back Draft Damper
DAOSL Back Draft Damper
£ 10.53

Look good, works well, except the shaft of the lanellae cuts...