Provides fully automatic control.
Detects contaminants such as cigarette smoke, body odours, toilet odours and cooking smells.
Activates ventilation system when preset threshold is reached.
Can ...
Electronic inline Duct humidistat to monitor humidity levels of 30-100 %RH suitable for switching extract fans, alarms or de-humidifiers
~ Size 108mmx72mmx72mm - Probe length 225mm.
~ Set of volt ...
Differential Pressure Switch - FPS2 - working range - 20 - 300 Pa - IP65
Differential pressure switch for air and non-corrosive gasses, these highly sensitive air differential pressure switches are...
CO2 Sensor is used to monitor CO2 levels in a room and when a pre-set level is reached the sensor can then be used to either (dependent on model) switch on a fan or for kitchen applications used to sw...
Automatically switches on when the relative humidity reaches an adjustable preset point and off again when it drops.
Features
Pull cord override switch.
Fan Indicator light.
Surface or recess moun...
Used in conjunction with electric heaters and controllers.
NTC type with linear scale.
Range of temperature 0-30ºC.
Protection class IP30.
2 models:
- Room sensor with set point adjustment,
0-3...
DT-1 Duct Mounted Thermostat.
Duct thermostats are used to monitor the temperature of air or liquids. Applications include
heating and air conditioning systems. The liquid filled sensing element ...
The GVI-001 is a gas interlock control system that either pressure switches or current sensors to prove airflow and when that airflow is proved then a electrical supply is made available to the gas v...
The GVI-002 is a gas interlock control system that can be used with either pressure switches or current sensors to monitor fans and enable the electrical supply to a gas valve actuator..
Control pa...
Differential Pressure Switch - FPS1 - working range - 50 - 500 Pa - IP54
Differential pressure switch for air and non-corrosive gasses, these highly sensitive air differential pressure switches are...
A PIR detector ideal for use in buildings, stairwells, corridors, warehouses, toilet lobbies or any area where ventilation or lighting is only required upon occupancy.
This version has changeover (SP...
Thermistor motor protection
The U-EK 230E is a thermistor motor protection device which is intended for use in conjunction with a contactor for the protection of the Atex fans in the DKEX, KTEX ...
Digital room thermostat with set-point adjust.
Change-over contacts for both heat and ventilation.
Electronic not mechanical switching.
Rated at 5 amps, (3 amps inductive)....
Brand new product.
Intelligent IAQ device available in three different versions: CO2 or VOC or RH%.
Designed to create DCV systems when directly linked with AC or ECOWATT fans using either relay or ...
Electronic Room humidistat to monitor humidity levels of 30-100 %RH suitable for switching extract fans, alarms or de-humidifiers
~ Set of volt free changeover contacts
~ Rating 5Amp, 2A inductive...
The CS2 current switch is used where fan current flow needs to be proved such as on a Gas Interlock system.
When current flow is present the switch will operate. The fan current carrying cable is ...
Differential Pressure Switch - FPS1 - working range - 20 - 300 Pa - IP54
Differential pressure switch for air and non-corrosive gasses, these highly sensitive air differential pressure switches are...
A PIR detector ideal for use in buildings, stairwells, corridors, warehouses, toilet lobbies or any area where ventilation or lighting is only required upon occupancy.
Features
• Fits standard 1 g...
Product description.
* Thermostat for controlling fans depending on the air temperature.
* It is possible to operate the fan with increasing or decreasing air temperature mode selected.
...