Switch Devices and Status Indicators

Technical Specifications • 230V AC 50 Hz • Fused:Supplied with BS1362 13A Fuse • Switch Rating: 13A Resistive (3kW) 750W Incandescent, Halogen lighting 500W Fluorescent lighting 200W LED ...

The ACOTO range of changeover panels are designed to suit either single or three phase (Direct On Line starting) twin fan units fitted with or without airflow switches. The changeover panels incorpora...

A range of auto changeover controllers for use with AC or EC single or three phase twin fans • Power on indication • Fail indication • Suitable for operating temperatures up to +40°C Option...

A range of auto changeover controllers for use with AC or EC single or three phase twin fans • Power on indication • Fail indication • Suitable for operating temperatures up to +40°C Option...

A range of auto changeover controllers for use with AC or EC single or three phase twin fans • Power on indication • Fail indication • Suitable for operating temperatures up to +40°C Option...

ACO3TO-ADS-VFC-7.1A...

The ACOAS changeover panels are designed to suit single phase twin fan units with airflow switches. Please note that an airflow switch must be fitted to monitor each fan and the airflow switches must ...

The ACOFR changeover panels are designed to suit single phase twin fan units where airflow switches are not fitted. The control panel fascia has a power lamp, fan fail lamp and a rocker switch. The V...

The RS1 is a 15 amp fan reversing switch housed in a compact and durable IP65 enclosure. The selector switch has forward, reverse and off positions and is suitable for single or three phase supply. �...

Control switch - CR150 for HV-150 A and HVE-150 A Fitted with: - One single CR-150 unit can operate up to 5 fans...

CR-300 Control unit for HV-230 A, HV-300 A and HVE-230 A Fitted with: - A selector for the different modes of fan operation (0ff and Two Speed Settings) - A reversing switch to change the airfl...

DOL MOTOR STARTER SINGLE PHASE Standard direct on line starters with conventional thermal overloads. The DOL starters are suitable for single or three phase fans with full load currents of up to 26 a...

DOL MOTOR STARTER THREE PHASE Standard direct on line starters with conventional thermal overloads. The DOL starters are suitable for single or three phase fans with full load currents of up to 26 am...

DOL MOTOR STARTER with ISOLATOR- THREE PHASE Standard direct on line starters with conventional thermal overloads. The DOL starters are suitable for single or three phase fans with full load current...

DS-2 2-Speed Switch (3 Phase) Used for Star/Delta switching on 3 phase fans, giving two speeds....

DS-2/2 2-Speed Switch (Single Phase) For Two Level Alternating current fans (2-Speed)....

Multi-function remote control panel with LCD display Supplied as standard with Prema products Control functions • Applications for pressure, CO2 , 0-10V, manual • Fan run status (fan fail) ...

...

Heat Recovery Inside Wall HRU-WALL - Controller Switch Please note this switch is only compliant for the HRUW100 and HRUW150 fan units....

IP65 Remote Speed Adjustment Station with on/off switch. For use with the INV3 range of inverters....

Isolator Relay Controller - 442030 Allows fan unit to be isolated from other mains circuit when used with TIM2, Trickle/Boost switch or light switch control....

Isolator switch for use with most fans listed. Fits into a pattress for on/off control. Single gang, 3 pole isolator...

Isolator switch for use with most fans listed. Fits into a pattress for on/off control....

Switch 1: High/Low speed Switch 2: On/Off (or off/tricklvent depending on the fan option selected. Surface or recess mounting Used with premier DX200 but suitable for many 2 speed fans. w85 x h85...

MD Motor protection switch On/Off Operation via push button switch, Manual Reset Function interference....

MEV Spider - Additional Wireless Switch to suit the MEV Spider Whole House Extract Ventilation unit to remotely switch it into boost operation....