• Model:DVG-V560D4

DVG-V 560D4-8/F400

£ 1,928.43 (excl. VAT)

£ 2,314.12 (inc. VAT)

DVG-V 560D4-8/F400
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x TD6000 Mixvent - 400mm2 x Egg Crate Grille with Dust panel filter 1 inch- 300x3001 x Multiflow SEL400/4-1AC1 x BKF 800D6-XL/F400 IE3 - Centrifugal rectangular duct fan 400C/2h1 x Helios GigaBox 400mm GBW 400/4 centrifugal1 x EM 400 E4M 01 - Mixed Flow Duct Fan - 400mm1 x Metal Inline Fan - VENT-400N1 x Duct Mounted Filter Box - G4 Grade Panel - 355mm2 x Female Ducting Connector - 150mm1 x Female Ducting Connector - 125mm1 x Anti Vibration Mounts - Large - Pack of 4 - AVM11 x Duct Termination with Mesh - 100mm1 x Flanged Spigot - 250mm1 x Helios AV125 External Wall Fan1 x 220 x 90mm Duct to Duct Connector for use with Insulated Thermal Ducting1 x Helios AV100 External Wall Fan1 x Female Ducting Connector - 80mm1 x SAVE VSR 300 heat recovery unit1 x 100mm Round 90 Degree Bend1 x GX6EC - High Performance Extract Fan1 x Male Ducting Connector - 150mm1 x Male Ducting Connector - 80mm1 x HV STYLVENT Wall Kit Threaded Rods1 x 220 x 90mm Duct to Fitting Connector for use with Insulated Thermal Ducting1 x 110 x 54mm Vertical 90 Degree Bend1 x Soler & Palau HXM-250mm1 x Transformer (silent) speed controller - RE 7.0 Amp1 x Helios AV150 External Wall Fan1 x Flanged Spigot - 125mm1 x 150mm Round Wall Plate1 x Duct Tape - Silver - DTape1 x 110 x 54mm Elbow Bend Female1 x Speed Controller - REB2.5-N1 x DHS 630E6 roof fan1 x Elta SkyFlow SSRL 400 EC1 x Airvent ceiling fan controller1 x Elta Skyflow SSRL560-1EC1 x DVG-H 315D4 - Smoke extract roof unit1 x DHS 500E6 roof fan1 x DVV 800D4-XL/F400 smoke extr
Reviews
Vectaire Elegance Low Energy DMEV Fan Range
Vectaire Elegance Low Energy DMEV Fan Range
£ 119.00

I've had 2 of these fans for 4 years now, and they are great...