• Model:DVG-V560D4

DVG-V 560D4-8/F400

£ 1,928.43 (excl. VAT)

£ 2,314.12 (inc. VAT)

DVG-V 560D4-8/F400
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel. Motor outside air stream is cooled with fresh air.

• Smoke and heat extract unit + normal ventilation
• Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
• Normal ventilation up to 120°C continuous operation
• Vertical exhaust
• Service switch serial
• Suitable for coastal applications
• Wide range of accessories
• Tested acc. to EN 12101-3 at LGAI, Barcelona
• CE-certified acc. to EN 12101-3, 2002-06 at TÃœV Süd
The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.

Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.

The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.

Motor outside air stream is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).

Note (for EU market only): not affected by efficiency provisions of Commision Regulation (EU) No 327/2011 - exception 3 (c) (i) (a)
1 x Duct Mounted Filter Box - G4 Grade Panel - 150mm1 x Soler & Palau - Contra Rotating TCBTx2-500 - IP651 x HIMF - Mixed Flow Fan 125mm Inline Fan1 x Elta Variable Speed Drive IP66 - 1.5KW1 x Duct Suspension Rings - 355mm1 x BOX Hood - BOX-INOX-6001 x Elta SCP630/4-3AC - IP551 x Elta Variable Speed Drive IP66 - 0.75KW1 x Onda Cristal 900 Kitchen Extractor Hood1 x *VORT HRW 30 MONO Evo - Single Room Heat Recovery Unit,1 x Ducting 90 Degree Bend - 355mm1 x DA 15/15 Feet1 x Acoustic MiniBox Fan - MINI-BOX 2002 x Spiral Rapid Lock Clamp - 125mm1 x menorca 900 cooker hood1 x Ducting T Piece Equal - 200mm1 x B-flow Impeller HCBB/T-560mm1 x Belt Drive Cased Axial Fan - 450mm - L version1 x CBM 7/9 4p 300W RE-VR1 x HCFB/4-315mm plastic impeller plate fan1 x Helios GigaBox 630mm GBD 630/6/6 centrifugal1 x Thermostat - Adjustable Room Thermostat - 230V1 x Spiral Ducting 3 Meters - 315mm1 x Etaline 250mm - D2 01 3 Phase1 x Multiflow SMB650/4-3AC1 x HRSB/6-710/24-BZ1 x Soler & Palau - HXTR/12-800/28-A1 x AW Sileo EC Plate Axial Fan - Three Phase - 800mm1 x HRST/6-800/28-BZ-68 (400V50)C1 x HCFT/6-800-H plastic impeller plate fan1 x HV Wall Mounted Belt Drive Fan 800mm 400V / 50Hz 0.75kW - Three Phase1 x Ducting 45 Degree Bend - 250mm1 x DHS 450EV roof fan1 x HRST/6-800/28-AQ C21 x DVS 450EV Centrifugal roof fan, vertical discharge1 x Soler & Palau - HXTR/6-800/H - IP541 x Soler & Palau - HCBT/4-800/H - IP551 x HRT/6-800/28-BZN-68C1 x Soler & Palau - HCBT/4-800/H-B FLOW ( Supply Air Fan) - IP55
Air Quality Sensor - AQS
Air Quality Sensor - AQS
£ 98.29 now £ 65.00
Reviews
EM 250-E2M 01- Etamaster-250
EM 250-E2M 01- Etamaster-250
£ 128.80

Really well made but comes with no speed controler? ?and can...